Hydril PD55 HNBR Pulsation Dampener Bladder | High Temp

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply the Hydril PD55 pulsation dampener range and its spare parts. The PD55 HNBR bladder is a high-performance diaphragm designed for PD55 mud pump pulsation dampeners operating in demanding high-temperature or H2S environments.
Conatct For Details
DetailReview(0)Additional

HYRIG can supply the Hydril PD55 pulsation dampener range and its spare parts. The PD55 HNBR bladder is a high-performance diaphragm designed for PD55 mud pump pulsation dampeners operating in demanding high-temperature or H2S environments.

Key Facts

  • Product Name: Hydril PD55 HNBR Pulsation Dampener Bladder
  • Equipment Type: Hydril PD55 Mud Pump Pulsation Dampener
  • Component Type: Bladder (Diaphragm)
  • Material: HNBR (Hydrogenated Nitrile Rubber)

Key Specifications

ParameterDetail
Component TypePulsation Dampener Bladder (Diaphragm)
Equipment TypeHydril PD55 Pulsation Dampener
MaterialHNBR (Hydrogenated Nitrile Rubber)
Standard ComplianceAPI 7K

Dimensions

ParameterDetail
CompatibilityPD55 Dampener
MaterialElastomer (HNBR)
WeightNot specified; confirm with supplier

Structure / Working Principle

The bladder is installed inside the upper chamber of the PD55 dampener cylinder. It separates the precharged gas from the drilling fluid. During mud pump operation, the flexible HNBR bladder expands and contracts to absorb pressure spikes. HNBR provides superior heat resistance and H2S tolerance compared to standard NBR.

Cross-Reference & Replacement

When servicing the PD55 dampener, inspect the internal components. Related parts:

Standard Material:

Related Accessories:

Selection Support

Need to confirm if HNBR is required for your specific well conditions? Contact HYRIG with your fluid type and operating pressure to confirm the correct bladder material and part number.

Applications

Suitable for oil and gas drilling rigs using Hydril PD55 pulsation dampeners in high-temperature or sour (H2S) service conditions.

Spare Parts

HYRIG provides replacement soft goods for Hydril PD series pulsation dampeners.

Frequently Asked Questions

What is the part number for the PD55 HNBR bladder?

The specific part number depends on the exact production batch. Please contact HYRIG with your dampener serial number to confirm the exact HNBR part number.

What precharge pressure should be used?

The precharge pressure should be set to 75% of the minimum operating system pressure, or a maximum of 2,000 psig.

Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.

Contact

HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril PD55 HNBR pulsation dampener bladder. For selection support, contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit