HYRIG can supply the Hydril pulsation dampener range and its spare parts. The K10/K20 Charging Hose Assembly is a flexible hose used to connect a nitrogen source to the dampener's charging valve for precharging.
| Parameter | Detail |
|---|---|
| Component Type | Charging Hose Assembly |
| Equipment Type | Hydril K10 & K20 Pulsation Dampeners |
| Working Pressure | High-pressure gas rated |
| Standard Compliance | API 7K |
| Parameter | Detail |
|---|---|
| Compatibility | K10, K20 Dampeners |
| Length | Varies by assembly |
| Weight | Not specified; confirm with supplier |
The charging hose connects the high-pressure nitrogen cylinder to the charging valve on the dampener. It typically features heavy-duty reinforced construction and appropriate fittings on both ends for safe gas transfer.
Ensure the hose is rated for the required gas pressure. Related components:
| Item | Component Description | Hydril Part Number |
|---|---|---|
| Charging Valve | K10 & K20 Charging Valve | 33844 / 1005073-02 |
| Pressure Gauge | K10/K20/PD55 Pressure Gauge | 38937 / 1900168-5 |
Related parts:
To ensure you receive the exact hose assembly for your K10 or K20 dampener, please contact HYRIG with your dampener serial number and current hose specifications.
Used for precharging nitrogen in Hydril K10 and K20 pulsation dampeners.
HYRIG provides replacement charging accessories and hoses for Hydril pulsation dampeners.
Why is there no specific part number listed?
The charging hose assembly may have variations or be supplied as part of a broader kit. Please provide your dampener serial number to HYRIG for exact matching.
What precharge pressure should be used?
The precharge pressure should be set to 75% of the minimum operating system pressure, or a maximum of 2,000 psig.
Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril K10/K20 charging hose assembly. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.