HYRIG can supply the Hydril pulsation dampener range and its spare parts. The Hydril K10 & K20 charging valve (Part No. 33844 / 1005073-02) is a critical safety and operational component used to precharge the dampener with nitrogen gas.
| Parameter | Detail |
|---|---|
| Part Number | 33844 / 1005073-02 |
| Component Type | Charging Valve (Gas Valve) |
| Equipment Type | Hydril K10 & K20 Pulsation Dampeners |
| Capacity | 10 / 20 Gallons |
| Standard Compliance | API 7K |
| Parameter | Detail |
|---|---|
| Compatibility | 10-Gallon & 20-Gallon Dampeners |
| Material | Steel / Brass |
| Weight | Not specified; confirm with supplier |
The charging valve is mounted at the top of the dampener. It allows maintenance personnel to safely connect a nitrogen bottle to precharge the bladder. It typically includes a check valve to prevent gas backflow and a bleed port for depressurizing the system before maintenance.
Always replace valve seals if leaks are detected. Related components:
| Item | Component Description | Hydril Part Number |
|---|---|---|
| K20 Bladder | Standard NBR Bladder | 35504-M / 1005208 |
| K10/K20 Gasket | Bottom Plate Gasket | 1005212 |
| K10/K20 Hose | Charging Hose Assembly | N/A |
Related parts:
Need to verify the valve specification? Contact HYRIG for compatibility.
Used for precharging nitrogen in 10-gallon (K10) and 20-gallon (K20) Hydril pulsation dampeners.
HYRIG provides replacement valves and charging accessories for Hydril pulsation dampeners.
What is the function of the charging valve?
It allows safe connection to a nitrogen source to precharge the dampener bladder.
What precharge pressure should be used?
The precharge pressure should be set to 75% of the minimum operating system pressure, or a maximum of 2,000 psig.
Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril K10 & K20 charging valve. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.