HYRIG can supply the Hydril K20 pulsation dampener range and its spare parts. The Hydril K20 bladder (Part No. 35504-M / 1005208) is a standard NBR (Nitrile Rubber) diaphragm component designed for 20-gallon mud pump pulsation dampeners to absorb pressure surges.
| Parameter | Detail |
|---|---|
| Part Number | 35504-M / 1005208 |
| Component Type | Pulsation Dampener Bladder (Diaphragm) |
| Equipment Type | Hydril K20 Mud Pump Pulsation Dampener |
| Capacity | 20 Gallons |
| Material | NBR (Nitrile Rubber) |
| Standard Compliance | API 7K |
| Parameter | Detail |
|---|---|
| Dampener Capacity | 20 Gallons |
| Bottom Connection | API Flange (varies by model) |
| Weight | Not specified; confirm with supplier |
The bladder is installed inside the upper chamber of the K20 dampener cylinder. It separates the precharged inert gas (typically nitrogen) from the drilling fluid. During mud pump operation, the reciprocating plunger generates pressure fluctuations; the flexible NBR bladder expands and contracts to absorb these sudden pressure spikes, ensuring smooth drilling fluid circulation.
When replacing the bladder, inspect the internal assembly components to ensure safe reassembly:
| Item | Component Description | Hydril Part Number |
|---|---|---|
| K20 Stabilizer | Stabilizer Rubber | 37016 / 1005213 |
| Plate | K10 & K20 Plate | 37017 / 1005214 |
| Bolt | K20 Bolt | 37018 / 1005215 |
Material Alternatives:
Related Parts:
Need to choose between NBR and HNBR for high-temperature or chemical applications? Contact HYRIG with your fluid type and operating pressure to confirm the correct bladder material.
Suitable for oil and gas drilling rigs using 20-gallon Hydril K20 pulsation dampeners, including land rigs and offshore mud circulation systems.
HYRIG provides full replacement soft goods and hardware for Hydril K20 pulsation dampeners.
What is the difference between 35504-M and 1005208-07?
The 35504-M / 1005208 is the standard NBR bladder. The 1005208-07 is the HNBR version for high-temperature or H2S environments.
What precharge pressure should be used?
The precharge pressure should be set to 75% of the minimum operating system pressure, or a maximum of 2,000 psig.
Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril K20 pulsation dampener bladder. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.