HYRIG can supply the Hydril pulsation dampener range and its spare parts. The Hydril K10/K20 bottom plate gasket (Part No. 1005212) is a critical elastomer seal used at the bottom connection of the pulsation dampener to prevent fluid leaks.
| Parameter | Detail |
|---|---|
| Part Number | 1005212 |
| Component Type | Gasket (Bottom Plate) |
| Equipment Type | Hydril K10 & K20 Pulsation Dampeners |
| Capacity | 10 / 20 Gallons |
| Material | NBR (Nitrile Rubber) |
| Standard Compliance | API 7K |
| Parameter | Detail |
|---|---|
| Compatibility | 10-Gallon & 20-Gallon Dampeners |
| Material | Elastomer |
| Weight | Not specified; confirm with supplier |
The bottom plate gasket is installed between the dampener body and the bottom connection flange. It compresses under bolt tension to provide a tight seal, preventing high-pressure drilling fluid from leaking out.
Always replace this gasket when opening the bottom connection. Related components:
| Item | Component Description | Hydril Part Number |
|---|---|---|
| K20 Bladder | Standard NBR Bladder | 35504-M / 1005208 |
| Charging Valve | K10 & K20 Charging Valve | 33844 / 1005073-02 |
| Pressure Gauge | K10/K20/PD55 Pressure Gauge | 38937 / 1900168-5 |
Related parts:
Need to verify if this gasket fits your dampener? Contact HYRIG with your model number.
Used in 10-gallon (K10) and 20-gallon (K20) Hydril pulsation dampeners.
HYRIG provides replacement gaskets and seals for Hydril pulsation dampeners.
When should the bottom plate gasket be replaced?
It should be replaced every time the bottom connection is opened, or if any fluid leak is detected.
Is this compatible with both K10 and K20?
Yes, part number 1005212 is shared between K10 and K20 models.
Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril K10/K20 bottom plate gasket. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.