HYRIG can supply the Hydril K20 pulsation dampener range and its spare parts. The Hydril K20 HNBR bladder (Part No. 1005208-07) is a high-performance diaphragm designed for 20-gallon mud pump pulsation dampeners in demanding high-temperature or H2S environments.
| Parameter | Detail |
|---|---|
| Part Number | 1005208-07 |
| Component Type | Pulsation Dampener Bladder (Diaphragm) |
| Equipment Type | Hydril K20 Mud Pump Pulsation Dampener |
| Capacity | 20 Gallons |
| Material | HNBR (Hydrogenated Nitrile Rubber) |
| Standard Compliance | API 7K |
| Parameter | Detail |
|---|---|
| Dampener Capacity | 20 Gallons |
| Bottom Connection | API Flange (varies by model) |
| Weight | Not specified; confirm with supplier |
The bladder is installed inside the upper chamber of the K20 dampener cylinder. It separates the precharged inert gas (typically nitrogen) from the drilling fluid. During mud pump operation, the reciprocating plunger generates pressure fluctuations; the flexible HNBR bladder expands and contracts to absorb these sudden pressure spikes. HNBR provides superior heat resistance and H2S tolerance compared to standard NBR.
When replacing the bladder, inspect the internal assembly components to ensure safe reassembly:
| Item | Component Description | Hydril Part Number |
|---|---|---|
| K20 Bladder | Standard NBR Bladder | 35504-M / 1005208 |
| K20 Stabilizer | Stabilizer Rubber | 37016 / 1005213 |
| Plate | K10 & K20 Plate | 37017 / 1005214 |
| Bolt | K20 Bolt | 37018 / 1005215 |
Material Alternatives:
Need to confirm if HNBR is required for your specific well conditions? Contact HYRIG with your fluid type and operating pressure to confirm the correct bladder material.
Suitable for oil and gas drilling rigs using 20-gallon Hydril K20 pulsation dampeners in high-temperature or sour (H2S) service conditions.
HYRIG provides full replacement soft goods and hardware for Hydril K20 pulsation dampeners.
What is the difference between 1005208-07 and 35504-M?
The 1005208-07 is made of HNBR for high-temperature/H2S resistance, while the 35504-M is the standard NBR version.
What precharge pressure should be used?
The precharge pressure should be set to 75% of the minimum operating system pressure, or a maximum of 2,000 psig.
Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril K20 HNBR bladder. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.