HYRIG can supply the Hydril K10 pulsation dampener range and its spare parts. The Hydril K10 lock washer (Part No. 36985 / 1900105-20) is a critical fastening component designed to prevent bolt loosening under high vibration.
| Parameter | Detail |
|---|---|
| Part Number | 36985 / 1900105-20 |
| Component Type | Lock Washer |
| Equipment Type | Hydril K10 Mud Pump Pulsation Dampener |
| Capacity | 10 Gallons |
| Standard Compliance | API 7K |
| Parameter | Detail |
|---|---|
| Dampener Capacity | 10 Gallons |
| Material | Spring Steel |
| Weight | Not specified; confirm with supplier |
Lock washers are placed under the bolt heads on the K10 dampener. The split-ring design creates tension that bites into the bolt and the mating surface, preventing the bolts from backing out due to the intense vibration generated by the mud pumps.
Always replace lock washers when reinstalling bolts. Related components:
| Item | Component Description | Hydril Part Number |
|---|---|---|
| K10 Bladder | Pulsation Dampener Bladder | 41586-M / 1005126 |
| K10 Stabilizer | Stabilizer Ring | 45808-7 / 1005132 |
| K10 Bolt | Connecting Bolt | 45559 / 1005133 |
Related parts:
Need to verify the correct washer for your K10 dampener? Contact HYRIG with your serial number.
Used in 10-gallon Hydril K pulsation dampeners on mud pumps in oil and gas drilling operations.
HYRIG provides replacement hardware for Hydril pulsation dampeners.
Why are lock washers necessary?
They prevent the bolts from vibrating loose during high-pressure mud pump operations.
How many washers are needed for a rebuild?
It matches the number of bolts required for the stabilizer assembly. Consult your manual or contact HYRIG.
Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril K10 lock washer. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.