HYRIG can supply the Hydril K10 pulsation dampener range and its spare parts. The Hydril K10 bladder (Part No. 41586-M / 1005126) is a flexible NBR diaphragm component designed for 10-gallon mud pump pulsation dampeners to absorb pressure surges.
| Parameter | Detail |
|---|---|
| Part Number | 41586-M / 1005126 |
| Component Type | Pulsation Dampener Bladder (Diaphragm) |
| Equipment Type | Hydril K10 Mud Pump Pulsation Dampener |
| Capacity | 10 Gallons |
| Working Pressure Range | 3,000 psi / 5,000 psi |
| Standard Compliance | API 7K |
| Recommended Precharge | 75% of min working pressure (≤ 2,000 psig) |
| Parameter | Detail |
|---|---|
| Dampener Capacity | 10 Gallons |
| Bottom Connection | 4-1/16" API Flange |
| Weight | Not specified; confirm with supplier |
The bladder is installed inside the upper chamber of the K10 dampener cylinder. It separates the precharged inert gas (typically nitrogen) from the drilling fluid. During mud pump operation, the reciprocating plunger generates pressure fluctuations; the flexible NBR bladder expands and contracts to absorb these sudden pressure spikes, ensuring smooth drilling fluid circulation.
When replacing the bladder, inspect the internal assembly components to ensure safe reassembly:
| Item | Component Description | Hydril Part Number |
|---|---|---|
| K10 Stabilizer | Stabilizer Ring | 45808-7 / 1005132 |
| K10 Bolt | Connecting Bolt | 45559 / 1005133 |
| K10 Lock Washer | Lock Washer | 36985 / 1900105-20 |
Related parts:
Need to choose between NBR and other elastomer compounds for high-temperature or chemical applications? Contact HYRIG with your fluid type and operating pressure to confirm the correct bladder material.
Suitable for oil and gas drilling rigs using 10-gallon Hydril style K pulsation dampeners, including land rigs and offshore mud circulation systems.
HYRIG provides full replacement soft goods and hardware for Hydril K10 pulsation dampeners.
What is the function of the K10 pulsation dampener bladder?
It acts as a flexible barrier that absorbs pressure surges generated by mud pumps, minimizing vibration and protecting downstream drilling components.
What precharge pressure should be used?
The precharge pressure should be set to 75% of the minimum operating system pressure, or a maximum of 2,000 psig.
Are alternative materials available?
Yes. Standard NBR is suitable for normal oil-based and water-based muds. HNBR and other elastomers are available on request for H2S or elevated temperature environments.
Disclaimer: This equipment is designed for high-pressure and hazardous applications. Ensure strict compliance with local safety standards and verify pressure ratings and API certifications prior to installation.
HYRIG is a China-based manufacturer and global supplier of mud pumps and spare parts. We can supply the Hydril K10 pulsation dampener bladder. For selection support, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.