The HYRIG L-CNG High Pressure Reciprocating Pump is a specialized cryogenic plunger pump engineered for pressurizing liquefied natural gas (LNG) to ultra-high pressures for L-CNG (Liquefied-to-Compressed Natural Gas) refueling stations, CNG cylinder filling, and urban natural gas peak-shaving applications. Operating at cryogenic temperatures, this horizontal reciprocating pump converts low-pressure LNG into high-pressure liquid for efficient CNG production and dispensing.
High Pressure Capability – The pump delivers discharge pressures up to 360 bar (5,220 psi), with typical configurations offering 20-40 MPa (200-400 bar). This makes it ideal for L-CNG refueling stations serving CNG vehicles.
Horizontal Reciprocating Plunger Design – Available in double or three-row configurations, the pump utilizes a reciprocating piston/plunger mechanism driven by a crankshaft section that converts rotary motion into linear stroke actuation. Flow rates range from 1,500 L/h to 60,000 L/h.
Vacuum-Jacketed Cold End – The pump head features a high-vacuum clamped design (vacuum up to 10⁻⁵ torr) that minimizes heat ingress and reduces cold loss to the maximum extent. This ensures stable cryogenic performance and minimizes boil-off gas generation.
Long-Life Piston Seals – Special material piston seals provide extended service life up to 4,000 hours, significantly reducing maintenance frequency and operational downtime.
Stable, Pulse-Minimized Output – Engineered to deliver small outlet pressure pulses with stable motor load, ensuring smooth operation and consistent high-pressure delivery.
Self-Lubricating Transmission – The transmission box features an internal splash lubrication system that eliminates the need for external lube oil pump skids. An oil temperature interlock device monitors transmission box temperature and interlocks with the control system to ensure unit safety.
Explosion-Proof Electrical Components – All electrical components are configured according to explosion protection requirements for safe operation in hazardous areas.
Skid-Mounted Configuration – Each unit is installed on a single, rigid skid with variable speed motor drive, enabling compact, space-efficient installation.
Fluid Handled: LNG (Liquefied Natural Gas), also suitable for LOX, LN₂, LAr
Type: Horizontal, double or three rows, reciprocating plunger pump
Flow Rate: 1,500 – 60,000 L/h
Inlet Pressure: 0.02 – 1.2 MPa
Outlet Pressure: 20 – 40 MPa (200 – 400 bar); up to 360 bar available
Cylinder Diameter: 18 – 150 mm
Piston Stroke: 18 – 100 mm
Pump Shaft Speed: 200 – 300 r/min
Piston Seal Life: Up to 4,000 hours
Vacuum Jacket: Up to 10⁻⁵ torr
NPSHR: < 1m
Certifications: JB/T 9076 (Specifications for Reciprocating Cryogenic Liquid Pumps), GB/T 9234 (Power Reciprocating Pumps)
L-CNG Refueling Stations – Pressurizing LNG to high pressure for conversion to CNG and vehicle fueling
CNG Cylinder Filling – High-pressure filling of CNG cylinders and tube trailers
Urban Natural Gas Peak-Shaving Stations – Pipeline network gas supplement and pressure boost
LNG Dewar Bottle Filling – High-pressure filling of portable LNG containers
Industrial Gas Transfer – Pressurization of cryogenic liquids for industrial applications
Superior Safety – Explosion-proof electrical components, vacuum-jacketed cold end, and oil temperature interlock systems ensure safe operation in hazardous environments.
High Efficiency – The reciprocating plunger design delivers efficient high-pressure conversion with minimal energy loss. Variable speed motor drive enables precise flow control and energy optimization.
Low Maintenance – Long-life piston seals (up to 4,000 hours) and internal splash lubrication reduce maintenance frequency and operational costs.
Application Flexibility – Available in double or three-row configurations with customizable flow rates and pressure ratings to meet diverse application requirements.
Compact Footprint – Skid-mounted design with vertical motor orientation minimizes installation space requirements.
Proven Durability – Backed by decades of cryogenic and high-pressure engineering expertise, the pump is designed for demanding continuous and intermittent operation.
Every HYRIG L-CNG High Pressure Reciprocating Pump is manufactured under stringent quality management systems and complies with:
JB/T 9076 – Specifications for Reciprocating Cryogenic Liquid Pumps
GB/T 9234 – Power Reciprocating Pumps
Explosion-Proof Certification – All electrical components comply with hazardous area requirements
Global Export Compliance – Exported to markets worldwide
For detailed technical data sheets, customized quotations, or to discuss your specific L-CNG high pressure reciprocating pump requirements, please contact our engineering team at:
info@hyrig.com
Our cryogenic specialists are ready to provide professional consultation and tailored support for your project needs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.