HYRIG liquid hydrogen submerged pump is a high-performance vertical, multistage centrifugal pump specifically engineered for the safe and efficient transfer of liquid hydrogen (LH₂) at cryogenic temperatures as low as -253°C. As the hydrogen economy expands, liquid hydrogen is preferred over gaseous hydrogen due to its significantly higher density (70 kg/m³ compared to 0.083 kg/m³ at atmospheric pressure). HYRIG liquid hydrogen pumps are engineered for hydrogen refueling stations, LH₂ receiving terminals, LH₂ bunkering, and aerospace applications.
The pump and motor are combined as a single, compact unit and fully submerged in the LH₂. This unique design eliminates rotating shaft seals, providing absolute zero leakage and removing the potential for ignition. The motor is cooled and lubricated by the LH₂ itself, reducing copper losses and maximizing specific power.
Fully Submerged, Seal‑Less Design – The pump and motor are completely immersed in the cryogenic liquid, eliminating dynamic mechanical seals for absolute zero leakage. The motor operates in an oxygen-free environment, removing the potential for ignition.
Cavitation‑Resistant Inducer – Equipped with a specially designed cavitation-resistant inlet inducer that optimizes impeller inlet geometry and operating speed to minimize cavitation potential.
High-Speed Operation – Nominally operating at speeds up to 24,750 rpm, enabling compact, lightweight designs for demanding applications.
Multistage High-Head Capability – Available in single-stage and multistage configurations to meet diverse head and flow requirements.
Vacuum-Insulated Construction – The pump sump is a cryogenic pressure vessel specially designed for optimal operation, featuring multi-layer insulation materials and low-temperature expansion joints.
VFD Compatibility – Motors are designed for variable frequency drive (VFD) operation, providing a wide speed range for precise flow and pressure control.
Modular Configurations – Available in modular, compact displacement pump configurations with 1, 2, 3 or 5 cylinder options providing a wide range of flows.
Vacuum-Jacketed Cold End – Minimizes cooldown losses and provides economical operation for liquid hydrogen applications.
ATEX Certified – Certified for safe operation in explosive environments.
Fluids Handled: Liquid Hydrogen (LH₂)
Temperature Range: Down to -253°C (-423°F)
Operating Speed: Up to 24,750 rpm
Pressure Ratings: Suitable for 30 MPa, 45 MPa, and 70 MPa hydrogen refueling stations
Configuration: Vertical, submerged motor, single-stage or multistage centrifugal
Mounting: In-tank or cryogenic sump installation
Sealing: Zero-leakage (fully submerged motor)
Design Standards: ISO 19880-11 (under development)
Certifications: ATEX
Hydrogen Refueling Stations (35 MPa, 45 MPa, 70 MPa) – Pressurizing LH₂ from storage to high-pressure dispensers for fuel cell vehicle refueling
LH₂ Receiving Terminals – Transferring liquid hydrogen from carriers to onshore storage and distribution systems
LH₂ Bunkering – Ship-to-ship and ship-to-shore LH₂ transfer for hydrogen-powered vessels
LH₂ Storage and Transport – Loading and unloading of LH₂ containers, trailers, ISO containers, and wagons
Aerospace Applications – Filling of space shuttles and rocket propulsion systems
Mobile Hydrogen Refueling – Submerged pump systems for mobile refueling applications
Zero Leakage Safety – The fully submerged, seal‑less design eliminates the primary leak path, ensuring safe handling of LH₂ in hazardous environments.
Ultra-Low Temperature Capability – Engineered for liquid hydrogen service at -253°C with proven reliability.
Exceptional Reliability – With LH₂-lubricated bearings, integrated motor cooling, and robust cryogenic construction, the pump delivers reliable continuous operation with minimal maintenance.
Energy Efficiency – Liquid-phase pumping is significantly more energy-efficient than gaseous hydrogen compression. High hydraulic efficiency combined with VFD control minimizes power consumption.
Reduced Heat Ingress – Vacuum-insulated construction and submerged motor design minimize heat conduction and evaporation losses.
Quick Start-Up – The pump remains constantly submerged in the cryogenic liquid, enabling immediate start-up without pre-cooling.
Proven Technology – Backed by decades of engineering expertise in cryogenic pumping systems.
Every Liquid Hydrogen Submerged Pump manufactured by HYRIG is produced under stringent quality management systems and holds certifications including:
ISO/AWI 19880-11 – Technical requirements and testing methods for liquid hydrogen pumps used in hydrogen refueling stations (under development)
ATEX – Certified for safe operation in explosive environments
Cryogenic LH₂ Expertise – Specialized in submerged pump solutions for liquid hydrogen transfer, refueling, and industrial applications
Zero-Leakage Safety – Fully submerged, seal‑less construction eliminates LH₂ leak risks
High-Speed Performance – Operating speeds up to 24,750 rpm for compact, efficient designs
Cavitation-Resistant Design – Optimized inducer and impeller geometry minimizes cavitation potential
Vacuum-Insulated Construction – Minimizes heat ingress and cooldown losses for economical operation
Comprehensive Service – Full after-sales support including installation supervision, commissioning, and spare parts supply
For detailed technical data sheets, customized quotations, or to discuss your specific liquid hydrogen submerged pump requirements, please contact our engineering team at:
info@hyrig.com
Our cryogenic and hydrogen specialists are ready to provide professional consultation and tailored support for your project needs.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.