Lanzhou LS TC450 Crown Block | 450 Ton & 7 Sheaves
Overview:
HYRIG can supply the Lanzhou LS TC450 crown block and its spare parts. The TC450 features a maximum load capacity of 4500 kN (450 tons).
| Model | Max Hook Load (kN) | Sheaves | Sheave O.D. (mm) | Wire Line Dia. (mm) | Overall Dimension (mm) |
|---|---|---|---|---|---|
| TC315 | 3150 | 7 | 1270 | 35 | 3295 x 2776 x 2514 |
| TC450 | 4500 | 7 | 1524 | 38 | 3068 x 2906 x 3576 |
| TC675 | 6750 | 8 | 1524 | 45 | 4594 x 3855 x 4411 |
Data source: Technical data table.
| Dimension Item | Specification |
|---|---|
| Overall Dimension (L x W x H) | 3068 x 2906 x 3576 mm |
| Frame Material | High strength steel shapes & plates |
| Sheave Groove | Intermediate frequency quenched |
The TC450 crown block is mounted at the top of the mast. It guides the drilling line between the drawworks and the traveling block.
When replacing a crown block, ensure the number of sheaves (7) matches the traveling block and the drawworks.
Need to match a crown block with your traveling block? Tell us your line size and load capacity. For lighter loads, view the Lanzhou LS TC315 Crown Block.
Used in the hoisting system of drilling rigs to support the drilling line and guide it to the drawworks.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including sheaves, bearings, and shafts.
Specifications:
FAQ:
Contact Us:
For Lanzhou LS TC450 crown block selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.