Lanzhou LS Crown Blocks | TC Series Complete Model Range
Overview:
HYRIG can supply the Lanzhou LS TC series crown blocks and their spare parts. This range includes models from TC135 to TC675.
| Model | Max Hook Load (kN) | Sheave O.D. (mm) | Number of Sheaves | Wire Line Dia. (mm) | Overall Dimension (mm) |
|---|---|---|---|---|---|
| TC135 | 1350 | 915 | 5 | 29 | 2500 x 2050 x 1920 |
| TC170 | 1700 | 1005 | 6 | 29 | 2687 x 2150 x 2046 |
| TC225 | 2250 | 1120 | 6 | 32 | 3200 x 3347 x 3640 |
| TC315 | 3150 | 1270 | 7 | 35 | 3295 x 2776 x 2514 |
| TC450 | 4500 | 1524 | 7 | 38 | 3068 x 2906 x 3576 |
| TC675 | 6750 | 1524 | 8 | 45 | 4594 x 3855 x 4411 |
Data source: Technical data table.
The overall dimensions and weight vary by model. The sheave cluster is tilted to counteract the traveling block's torque.
The crown block is mounted at the top of the mast. It contains multiple sheaves that guide the drilling line.
Selecting the correct crown block requires matching the number of sheaves and the drilling line diameter.
Used in the hoisting system of drilling rigs to support the drilling line and guide it to the drawworks.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including sheaves, bearings, and shafts.
Specifications:
FAQ:
Contact Us:
For Lanzhou LS crown block selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.