The LG series is a vertical, single‑stage, single‑suction, volute type, long shaft submerged centrifugal pump manufactured to API 610 11th Edition Type VS4. It is specifically designed for transferring molten urea (urea melt) in fertilizer plants, prilling tower feed, and granulation service.
Key Parameters
Flow rate: 3 – 2,600 m³/h
Total head: 5 – 250 m
Operating temperature: -20°C to +120°C (LG); up to +400°C (LYG high temp)
Design pressure: Up to 5.0 MPa
Immersion depth: Up to 7 m (longer custom available)
Design Features
Submerged impeller and volute – always primed, no suction lift issues
Double volute casing (sizes ≥80mm) – balances radial hydraulic forces
Steam jacket – integral heating on casing and column pipe (≤0.6 MPa steam, ≤170°C) prevents urea crystallization
Open or closed impeller – open type handles trace solids/deposits
Long line shaft with multi‑point sliding bearings – supports deep sump installation
No submerged dynamic seal – leakage prevented by column pipe
Flanged column sections – easy assembly and maintenance
Materials (Urea Melt – Copper‑free)
| Component | Material |
|---|---|
| Volute casing | 304SS or 316L SS |
| Impeller | 304SS or 316L (open type) |
| Line shaft | AISI 416 or 17‑4PH SS |
| Column pipe | Carbon steel or 304SS |
| Discharge head | Cast iron / carbon steel (insulated) |
| Sliding bearings | PTFE‑lined bronze or carbon |
| Gaskets / O‑rings | PTFE or EPDM |
Seal & Flush Plans
No bottom seal (standard configuration) – no submerged rotating seal
Top stuffing box (optional) – for emission control
API 682 mechanical seal (upon request) – Plan 11 or Plan 52
Auxiliary Systems
Minimum flow protection – automatic recirculation valve (ARC)
Steam jacket – low pressure steam, connections on casing and column pipe
Bearing cooling – water‑cooled housing recommended for >120°C
Casing drain – low point drain for pit maintenance
Applications
Urea prilling tower feed (melt pit to tower top)
Urea granulation feed (evaporator to granulator)
Molten urea transfer between storage and finishing units
High temperature chemical services (LYG version: hot oil, molten sulfur, molten paraffin)
Why LG for Urea Melt?
API 610 VS4 compliant – heavy duty, reliable operation
Submerged design – no priming, excellent low NPSH
Steam jacket prevents crystallization
Copper‑free materials – compatible with urea service
Long shaft customizable to pit depth
China manufacturer – competitive price, spare parts support
For more information, contact us at info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.