LSPE DG450 Drilling Hook | 450 Ton Load Capacity
Overview:
HYRIG can supply the LSPE DG450 hook and its spare parts. The DG450 is a heavy-duty drilling hook featuring a maximum load capacity of 4500 kN (450 tons).
| Model | Max Hook Load (kN) | Major-hook Opening (mm) | Diameter of Major-hook (mm) | Spring Travel (mm) |
|---|---|---|---|---|
| DG315 | 3150 | 220 | 180 | 200 |
| DG450 | 4500 | 220 | 180 | 200 |
| DG675 | 6750 | 240 | 228 | 220 |
Data source: Technical data table.
| Dimension Item | Specification |
|---|---|
| Overall Length | 2950 mm |
| Overall Width | 890 mm |
| Overall Height | 880 mm |
| Material | Cast alloy steel |
The DG450 hook is attached to the traveling block via a bail. The hydraulic snubber assembly protects drill pipe joints during make-up and break-out.
When replacing a hook, verify the load capacity (450 tons) and the bail connection to the traveling block.
Need to match a hook with your traveling block? Tell us your block model and load capacity. For lighter loads, view the LSPE DG315 Hook.
Used in the hoisting system of drilling rigs to handle the drill string and casing.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including springs, locking mechanisms, and the main hook body.
Specifications:
FAQ:
Contact Us:
For LSPE DG450 hook selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.