LSPE Drilling Hooks | DG Series Complete Model Range
Overview:
HYRIG can supply the LSPE DG series drilling hooks and their spare parts. This range includes models from DG225 to DG675, designed for suspending the drill string and providing a reliable connection for elevators.
| Model | Max Hook Load (kN) | Major-hook Opening (mm) | Diameter of Major-hook (mm) | Spring Travel (mm) | Overall Dimension (mm) |
|---|---|---|---|---|---|
| DG225 | 2250 | 190 | 160 | 180 | 2545 x 720 x 750 |
| DG315 | 3150 | 220 | 180 | 200 | 2953 x 890 x 880 |
| DG450 | 4500 | 220 | 180 | 200 | 2950 x 890 x 880 |
| DG675 | 6750 | 240 | 228 | 220 | 3600 x 1110 x 1020 |
Data source: Technical data table.
The primary-load-carrying parts of the hook are subjected to NDE (Non-Destructive Examination) testing. A reliable safety device is provided at the hook.
The hook is attached to the bottom of the traveling block. It is equipped with a hydraulic snubber assembly to protect drill pipe joints.
Selecting the correct hook requires matching the load capacity and the bail connection.
Used in the hoisting system of drilling rigs to handle the drill string and casing.
Disclaimer: This equipment is designed for hazardous environments. Ensure strict compliance with local safety standards and verify certification documents prior to operation.
We supply replacement parts including the main hook, springs, and locking mechanisms.
Specifications:
FAQ:
Contact Us:
For LSPE drilling hook selection and spare parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.