Mission Magnum XP Full Series Mechanical Seal | Direct OEM Replacement for 24035 24036 22451 | Hyrig Seal

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Hyrig offers a complete mechanical seal solution for the Mission Magnum XP full series of centrifugal pumps. Designed for seamless direct replacement, our seals are 100% dimensionally compatible with original factory stuffing box and shaft sleeve specifications, covering all standard models from 3×2×13 to 10×8×14, including both clockwise and counterclockwise rotating impeller variants. Hyrig seals directly replace OEM part numbers 24035 (Garlock type), 24036 (Crane type), and the 22451 series.
Conatct For Details
DetailReview(0)Additional

Hyrig Mechanical Seal for Mission Magnum XP Full Series – Direct OEM Replacement

Complete Sealing Solution for Mission Magnum XP Centrifugal Pumps

The Hyrig mechanical seal is specifically engineered for the Mission Magnum XP full series of centrifugal pumps, covering all standard models from 3×2×13 to 10×8×14, including both clockwise and counterclockwise rotating impeller variants. Fully compatible with original factory stuffing box dimensions and shaft sleeve specifications, Hyrig seals directly replace OEM part numbers such as 24035 (Garlock type), 24036 (Crane type), and the 22451 series, achieving 100% seamless adaptation.


Mission Magnum XP Pump Models & Corresponding Hyrig Seal Models

Mission Magnum XP ModelShaft Diameter (inch)RotationHyrig Seal ModelOEM Replacement No.
3×2×131.5CW/CCWH-MXP-15022451-1 (648414308)
4×3×101.5CW/CCWH-MXP-15022451-1 (648414308)
4×3×131.875CW/CCWH-MXP-15022451-1 (648414308)
4×3×141.875CW/CCWH-MXP-15022451-1 (648414308)
5×4×102.5CW/CCWH-MXP-25024036 (658416102)
5×4×132.5CW/CCWH-MXP-25024036 (658416102)
5×4×142.5CW/CCWH-MXP-25024036 (658416102)
6×4×102.5CW/CCWH-MXP-25024036 (658416102)
6×4×133.5CW/CCWH-MXP-25024036 (658416102)
6×4×143.5CW/CCWH-MXP-25024036 (658416102)
8×6×103.5CW/CCWH-MXP-25024036 (658416102)
8×6×133.5CW/CCWH-MXP-25024036 (658416102)
8×6×143.5CW/CCWH-MXP-25024036 (658416102)
10×8×103.5CW/CCWH-MXP-25024036 (658416102)
10×8×133.5CW/CCWH-MXP-25024036 (658416102)
10×8×143.5CW/CCWH-MXP-25024036 (658416102)
High-Temp (All Models)1.5–3.5CW/CCWH-MXP-HR22451-9A (SiC)
Corrosive Media (All Models)1.5–3.5CW/CCWH-MXP-CR24035 (Garlock type)

Key Adaptation Features

Model Naming Explained

Mission Magnum XP pumps use the format Inlet Size × Outlet Size × Impeller Diameter (inches). Hyrig seals are matched by shaft diameter and operating conditions:

  • H-MXP-150 – For shafts of 1.5″ or 1.875″ (models 3×2×13 to 4×3×14)

  • H-MXP-250 – For shafts of 2.5″ or 3.5″ (models 5×4×10 to 10×8×14)

  • H-MXP-HR / H-MXP-CR – Custom high-temperature (-30°C to 205°C) or corrosion-resistant variants for all models

Dimensional Compatibility

All Hyrig seals are precision-engineered to match the original stuffing box (OEM 24027-01-xx) and shaft sleeve (OEM 24029-21BZ) dimensions. The single-end design (optional lantern ring for larger models) ensures perfect alignment with the pump’s thick-walled concentric casing and heavy-duty shaft, eliminating leakage caused by shaft deflection.


Materials & Performance Advantages

Material Configuration (Customizable)

ComponentOptions
Mating FacesTungsten Carbide/TC, Silicon Carbide/SiC, Carbon-Ceramic
ElastomersNBR (general), Viton (oil/high-temp), EPDM (acid/alkali) – Temperature range -30°C to 205°C
Metal Parts304SS / 316SS stainless steel – corrosion-resistant, non-magnetic

Performance Highlights

  • Extended Service Life – Face hardness ≥90HRC, 50% higher wear resistance than OEM seals. Suitable for max speed 1800 rpm and max pressure 2.8 MPa.

  • Low Maintenance – Integrated pre-lubrication structure reduces bearing load and maintenance frequency.

  • Full-Condition Adaptability – Handles drilling mud, industrial slurry, high-temperature fluids, and corrosive media.


Standards & Guarantees

  • Quality Certifications – ISO 9001, API 682 compliant

  • Complete Kit – Main seal + 3 sets of packing + positioning pins + installation tools (stainless steel shaft sleeve optional)

  • After-Sales – 1-year warranty, installation guidance, bulk orders delivered within 7 days


Applications

Widely used in:

  • Oilfield drilling mud transfer

  • Industrial sand-containing slurry transport

  • Chemical corrosive media handling

  • Mine tailings treatment

Ensure efficient, leak-free operation of your Mission Magnum XP pumps with Hyrig mechanical seals.


For inquiries or bulk orders, contact Hyrig today!

Email:   info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit