MUD HOG Centrifugal Pump 2.5 Series
Overview:
The MUD HOG Centrifugal Pump 2.5 Series is a family of heavy-duty centrifugal pumps for drilling mud, fresh water and sea water. This series page is a selection hub for the six 2.5 size models. It summarizes size differences and points users to the core MUD HOG Centrifugal Pump 2.5 page for full component and testing details.
The 3 x 2 x 13 and 4 x 3 x 13 sizes do not use the semi-open impeller design applied to the other 2.5 sizes. The 3 x 2 x 13 size has no wear pad and uses a hard iron casing. Other 2.5 sizes are offered with wear pads that can be replaced using repair kits containing a wear pad, studs, nuts and a gasket.
The 2.5 series uses a 4140 low alloy steel shaft with an optional Reverse Rotation Prevention system. A stainless steel shaft sleeve protects the shaft, with ceramic-coated and 17-4 PH sleeves available for alternative packing options.
The 2.5 series uses a heavy-duty mechanical seal as standard, with tungsten carbide or silicon carbide faces. Packing rings, king packing and injectable sealants are available as economical alternatives. Labyrinth seals are standard to reduce bearing contamination and shaft wear. The inboard bearing is a double-row angular contact bearing; the outboard side uses two angular contact bearings installed back-to-back for thrust handling.
Specifications:
Contact Us:
For size selection or a quote, contact info@hyrig.com. HYRIG is a China leading manufacturer of MUD HOG Centrifugal Pump 2.5 Series.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.