MUD HOG Centrifugal Pump 2.5 | Heavy-Duty Mud & Sea Water Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The MUD HOG Centrifugal Pump 2.5 is a heavy-duty pump for drilling mud, fresh water and sea water. It uses a semi-open impeller, heavy-duty mechanical seal, stainless shaft sleeve, labyrinth seals and premium bearings. Sizes: 3x2x13, 4x3x13, 5x4x14, 6x5x11, 8x6x11 and 8x6x14 in.
Conatct For Details
DetailReview(0)Additional

MUD HOG Centrifugal Pump 2.5

Overview:

The MUD HOG Centrifugal Pump 2.5 is a heavy-duty centrifugal pump designed for drilling mud, fresh water and sea water service. It is the core model in the MUD HOG 2.5 series and is built with serviceable components, interchangeable parts and a bearing arrangement designed for stable operation in demanding fluid-transfer applications.

Core Components

Pump shaft: The 2.5 pump shaft is made of 4140 low alloy steel. An optional Reverse Rotation Prevention (RRP) system is available to protect fluid-end components if the motor is wired incorrectly.

Impeller: Except for the 3 x 2 x 13 and 4 x 3 x 13 sizes, the 2.5 impellers use a semi-open design to increase fluid kinetic energy through the front vanes. All impellers have back vanes that reduce stuffing box cover wear and help limit contaminants entering the sealing area.

Seals: A heavy-duty mechanical seal is standard, with tungsten carbide or silicon carbide sealing faces depending on the application. Regular packing rings, king packing and injectable sealants are available as more economical sealing options.

Shaft sleeve: A stainless steel shaft sleeve protects the low alloy steel shaft from abrasion and corrosion. Ceramic-coated and 17-4 PH shaft sleeves are available for use with alternative packing options.

Labyrinth seals: Premium labyrinth seals help keep contaminants away from the bearings and do not cause shaft wear.

Wear pads: Wear pads are offered on 2.5 casings except the 3 x 2 x 13 in. size. Replacement kits include a wear pad, studs, nuts and a gasket.

Bearings: The inboard bearing is a double-row angular contact bearing for shaft stability. Two outboard angular contact bearings are installed back-to-back for maximum thrust handling capability.

Materials, Testing and Options

  • MUD HOG 2.5 and 1.8 pumps are ATEX certified.
  • All MUD HOG pumps are hydrostatically tested at no charge.
  • Casing repair kits and stuffing box covers are hydrostatically tested.
  • Standard pumps use 3 to 6 mils DFT alkyd paint.
  • Offshore coating is available: zinc primer, epoxy second coat and high-build polyurethane top coat.
  • Material certification and performance testing are available on request.
  • The redesigned 2.5 frame is more than 50 lb lighter and has improved stress characteristics.
  • Stainless steel casing and wear pad nuts allow easy access.
  • Skid packages are available with customer-specified motors, starters, paint or galvanized finish.
  • Fluid-end components are available in hard iron; extra hard iron components are offered for severe applications. The 3 x 2 x 13 size has no wear pad and uses a hard iron casing.

Specifications:

  • Size Models: 3 x 2 x 13 in.; 4 x 3 x 13 in.; 5 x 4 x 14 in.; 6 x 5 x 11 in.; 8 x 6 x 11 in.; 8 x 6 x 14 in.
  • Applications: The MUD HOG Centrifugal Pump 2.5 is used for drilling mud transfer, fresh water service, sea water service, mud pump and solid control equipment support, and industrial centrifugal pumping where interchangeable parts and serviceability are required.

FAQ:

  • What sizes are available for MUD HOG Centrifugal Pump 2.5? Available sizes include 3 x 2 x 13, 4 x 3 x 13, 5 x 4 x 14, 6 x 5 x 11, 8 x 6 x 11 and 8 x 6 x 14 in.
  • What seal is standard on the 2.5 model? A heavy-duty mechanical seal is standard, with tungsten carbide or silicon carbide faces depending on application.
  • Is the MUD HOG 2.5 ATEX certified? Yes. The 2.5 and 1.8 MUD HOG pumps are ATEX certified.

Contact Us:

For selection, drawings, repair kits or skid package requirements, contact info@hyrig.com. HYRIG is a China leading manufacturer of MUD HOG Centrifugal Pump 2.5.

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit