The 1290335 (BL-1290335 – complete studded discharge module assembly with valves, seats, and seals) and 1290336 (BL-1290336 – single discharge module shell / cylinder body without valve internals) are original equipment manufacturer (OEM) FLUID END units produced by National Oilwell Varco (NOV) for the National 10P‑130 triplex mud pump (1300 HP, 5,000 psi / 34.3 MPa rated working pressure). This FLUID END is configured as a studded fluid end, consisting of a discharge module and a separate suction module (1290337). It functions as both a hydraulic cylinder and a complete hydraulic box, delivering reliable hydraulic power for deep wells (4,000–6,000 meters), high‑pressure drilling, and land/offshore rigs. The pump assembly drawing number is 1290000.
Key Specifications
| Parameter | National 10P‑130 FLUID END (NOV) |
|---|---|
| OEM Part No. (complete studded discharge assembly) | 1290335 (BL-1290335) (includes valves, seats, seals) |
| OEM Part No. (single discharge module shell) | 1290336 (BL-1290336) (discharge module only, without valve internals) |
| OEM Part No. (suction module with studs) | 1290337 (complete suction module for 10P‑130) |
| Pump Model | National 10P‑130 (1300 HP, triplex) |
| Pump Drawing No. | 1290000 (complete pump assembly) |
| Working Pressure | 5,000 psi (34.3 MPa) |
| Hydrostatic Test Pressure | 7,500 psi (51.7 MPa) – 1.5× rated |
| Max Liner ID | 6¼″ (159 mm) standard (other sizes available) |
| Valve Type | API #7 standard suction & discharge valves (larger than 8P‑80's #6) |
| Material | High‑strength alloy forged steel, quenched and tempered |
| Sealing | API 5,000 psi flanges, metal‑to‑metal hard seal |
| Configuration | Studded fluid end – discharge module + suction module |
| Interchangeability | Three cylinders per pump; discharge modules fully interchangeable |
| Operating Temperature | -20°C to +120°C |
Related Wear Parts & Consumables (OEM NOV for 10P‑130)
| Component | OEM Part No. | Description |
|---|---|---|
| Discharge Valve Assembly | 1290342 | Complete discharge valve (API #7) for 10P‑130 |
| Suction Valve Assembly | 1290343 | Complete suction valve (API #7) for 10P‑130 |
| Liner (standard 6¼″) | 1290165 | Cylinder liner – standard size 6¼″ (159 mm) ID |
| Valve Cover | 1290307 | Valve cover / cylinder head for fluid end |
| Wear Plate | 1290358 | Wear plate for fluid end protection |
Structural & Design Advantages – A Studded FLUID END for 10P‑130 Pumps
Studded suction module design – Pre‑installed studs on suction module (1290337) allow direct bolt‑on connection to discharge module (1290335/1290336), eliminating on‑site welding and reducing installation time.
Straight flow channel + valve‑over‑valve – Short, low‑resistance flow passages optimized for high‑sand drilling fluids. API #7 valve bore provides excellent flow capacity for 1300HP class pumps.
High‑pressure heavy‑duty design – Thickened pressure‑bearing walls resist fatigue cracks under cyclic 5,000 psi service, designed for deep‑well operations.
Metal‑to‑metal rigid seals – Flanges and valve covers feature metal sealing for zero leakage under rated pressure.
Modular maintenance – Quick‑access valve covers (1290307) allow valve seat/insert replacement without disassembling the entire pump. Each hydraulic cylinder can be serviced independently.
Why Choose This National 10P‑130 FLUID END?
OEM NOV fit – Exact National Oilwell Varco design for 10P‑130 pump. 100% dimensional and pressure match, eliminating assembly deviation, leakage, and vibration.
Forged high‑pressure durability – High‑strength alloy forging + heat treatment resists erosion and fatigue in high‑sand, deep‑well conditions.
Studded modular design – Suction and discharge modules separate for easier handling and maintenance.
Complete OEM wear parts availability – Full range of consumables (discharge valve 1290342, suction valve 1290343, liner 1290165, valve cover 1290307, wear plate 1290358) simplifies procurement.
Applications – The High‑Power FLUID END for 10P‑130 Pumps
National 10P‑130 (NOV) mud pump – deep wells (4,000–6,000 meters), high‑pressure drilling (≤5,000 psi), land and offshore rigs.
Suitable drilling environments – Deep wells, high‑sand drilling fluids, conventional high‑pressure operations.
Compatible components – Pairs with API #7 valve assemblies (1290342 discharge / 1290343 suction), liner 1290165 (6¼″), valve cover 1290307, wear plate 1290358, pistons, and piston rods as a complete FLUID END system.
Procurement & Replacement Notes
Order 1290335 (BL-1290335) for the complete studded discharge module assembly (one hydraulic box / hydraulic cylinder with valves, seats, and seals). Order three units for a complete pump.
Order 1290336 (BL-1290336) for individual discharge module shells (cylinder body only, valve internals purchased separately).
Order 1290337 for the suction module (includes studs). Order one per discharge module.
Order 1290342 for discharge valve assemblies (API #7) and 1290343 for suction valve assemblies.
Order 1290165 for standard 6¼″ liners (specify other sizes if needed).
Order 1290307 for valve covers and 1290358 for wear plates.
Interchangeability – This fluid end is specific to National 10P‑130. Confirm compatibility with NOV 14‑P‑220 or other models before cross‑referencing.
Maintenance tips – Inspect high‑pressure seals weekly. Replace valve assemblies every 500–1,000 operating hours depending on abrasiveness. Check wear plate (1290358) for erosion during maintenance. Perform magnetic particle inspection after extended high‑pressure service.
Contact for Genuine National 10P‑130 (NOV) FLUID END & Wear Parts
For pricing, technical datasheets, or ready stock of the National 10P‑130 FLUID END (1290335 / 1290336 / 1290337) and related wear parts (valve assemblies, liners, valve covers, wear plates), please email:
info@hyrig.com
OEM quality, global shipping. Complete FLUID END solutions for National 10P‑130, NOV 14‑P‑220, and other pump models available.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.