The 1291280 (complete studded discharge module assembly with valves, seats, and seals) and 1291281 (single discharge module shell / cylinder body without valve internals) are original equipment manufacturer (OEM) FLUID END units produced by National Oilwell Varco (NOV) for the National 8P‑80 triplex mud pump (800 HP, 5,000 psi / 34.3 MPa rated working pressure). This FLUID END is configured as a studded fluid end, consisting of a discharge module and a separate suction module (1290338). It functions as both a hydraulic cylinder and a complete hydraulic box, delivering reliable hydraulic power for medium‑deep wells (3,000–5,000 meters), high‑pressure drilling, and land rigs.
Key Specifications
| Parameter | National 8P‑80 FLUID END (NOV) |
|---|---|
| OEM Part No. (complete studded discharge assembly) | 1291280 (includes valves, seats, seals) |
| OEM Part No. (single discharge module shell) | 1291281 (discharge module only, without valve internals) |
| OEM Part No. (suction module with studs) | 1290338 (complete suction module for 8P‑80) |
| Pump Model | National 8P‑80 (800 HP, triplex) |
| Working Pressure | 5,000 psi (34.3 MPa) |
| Hydrostatic Test Pressure | 7,500 psi (51.7 MPa) – 1.5× rated |
| Max Liner ID | 6¼″ (159 mm) standard (other sizes available) |
| Valve Type | API #6 standard suction & discharge valves |
| Material | High‑strength alloy forged steel, quenched and tempered |
| Sealing | API 5,000 psi flanges, metal‑to‑metal hard seal |
| Configuration | Studded fluid end – discharge module + suction module |
| Interchangeability | Two discharge modules per pump (total two cylinders for 8P‑80, which is a duplex? Note: 8P‑80 is a triplex pump – confirm: three cylinders) |
| Operating Temperature | -20°C to +120°C |
Note on Pump Configuration: The 8P‑80 is a triplex pump (three cylinders). The discharge module (1291280/1291281) is the main cylinder body. The suction module (1290338) is a separate component that mounts to the discharge module via studs.
Related Wear Parts & Consumables (OEM NOV for 8P‑80)
| Component | OEM Part No. | Description |
|---|---|---|
| Valve Keeper (Valve Guide Retainer) | 1292140 | Valve guide keeper / retainer for API #6 valve assembly |
| Valve Guide Bushing | 1292141 | Valve guide bushing / liner for valve assembly |
| Valve Cover Gasket | 1540126 | Gasket for valve cover seal |
| Wear Plate | 1290357 | Wear plate / liner for fluid end protection |
Structural & Design Advantages – A Studded FLUID END for 8P‑80 Pumps
Studded suction module design – Pre‑installed studs on suction module (1290338) allow direct bolt‑on connection to discharge module (1291280/1291281), eliminating on‑site welding and reducing installation time.
Straight flow channel + valve‑over‑valve – Short, low‑resistance flow passages optimized for high‑sand drilling fluids. API #6 valve bore provides good flow capacity with reduced cavitation.
High‑pressure heavy‑duty design – Thickened pressure‑bearing walls resist fatigue cracks under cyclic 5,000 psi service.
Metal‑to‑metal rigid seals – Flanges and valve covers feature metal sealing for zero leakage under rated pressure.
Modular maintenance – Quick‑access valve covers allow valve seat/insert replacement without disassembling the entire pump. Each hydraulic cylinder can be serviced independently.
Why Choose This National 8P‑80 FLUID END?
OEM NOV fit – Exact National Oilwell Varco design for 8P‑80 pump. 100% dimensional and pressure match, eliminating assembly deviation, leakage, and vibration.
Forged high‑pressure durability – High‑strength alloy forging + heat treatment resists erosion and fatigue in high‑sand, medium‑deep well conditions.
Studded modular design – Suction and discharge modules separate for easier handling and maintenance.
Available OEM wear parts – Complete range of consumables (valve keeper, bushing, gasket, wear plate) available to simplify procurement.
Applications – The Reliable FLUID END for 8P‑80 Pumps
National 8P‑80 (NOV) mud pump – medium‑deep wells (3,000–5,000 meters), high‑pressure drilling (≤5,000 psi), land rigs, workover operations.
Suitable drilling environments – Medium‑deep wells, high‑sand drilling fluids, conventional high‑pressure operations.
Compatible components – Pairs with API #6 valve assemblies (using keeper 1292140 and bushing 1292141), valve cover gasket 1540126, wear plate 1290357, liners (e.g., 6¼″), pistons, and piston rods as a complete FLUID END system.
Procurement & Replacement Notes
Order 1291280 for the complete studded discharge module assembly (one hydraulic box / hydraulic cylinder with valves, seats, and seals). Order three units for a complete pump.
Order 1291281 for individual discharge module shells (cylinder body only, valve internals purchased separately).
Order 1290338 for the suction module (includes studs). Order one per discharge module.
Order 1292140 (valve keeper / retainer) and 1292141 (valve guide bushing) for valve assembly replacement.
Order 1540126 for valve cover gaskets (quantity per valve).
Order 1290357 for wear plates (quantity per cylinder as needed).
Interchangeability – This fluid end is specific to National 8P‑80. Not interchangeable with other pump models without confirmation.
Maintenance tips – Inspect high‑pressure seals weekly. Replace valve cover gaskets (1540126) during valve service. Check wear plates (1290357) for erosion every 500 operating hours. Perform magnetic particle inspection after extended high‑pressure service.
Contact for Genuine National 8P‑80 (NOV) FLUID END & Wear Parts
For pricing, technical datasheets, or ready stock of the National 8P‑80 FLUID END (1291280 / 1291281 / 1290338) and related wear parts (valve keeper, bushing, gasket, wear plate), please email:
info@hyrig.com
OEM quality, global shipping. Complete FLUID END solutions for National 8P‑80, NOV 14‑P‑220, and other pump models available.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.