The National 10-P-130 (10P130) is a 1,300 HP triplex single-acting piston pump with a 7 inch x 10 inch (177.8 mm x 254 mm) bore and stroke configuration, rated for a maximum working pressure of 5,000 PSI. The pump is widely used in deep well drilling, high-pressure operations, land and offshore rigs, and well service applications. The 10-P-130 shares its suction module (1290338) with the 8-P-80 and 9-P-100 models, simplifying inventory management. The fluid end is available with standard TAPR-LOK valve covers or fast-change valve covers for reduced maintenance time. Our National 10-P-130 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.
Easy Wearing Parts for National 10-P-130 with OEM Part Numbers:
Fluid End Modules:
Discharge Module, Studded (Includes Items 2–10) — OEM Part No. 1290335 (Qty 3)
Discharge Module Only — OEM Part No. 1290336 (Qty 3)
Suction Module, Studded (Includes Items 9, 10, 12) — OEM Part No. 1290338 (Qty 3)
Suction Module Only — OEM Part No. 1290339 (Qty 3)
Studs and Nuts:
Nut, Frame — OEM Part No. 6300240 (Qty 24)
Stud, Frame — OEM Part No. 2408020 (Qty 24)
Nut, Liner Bushing — OEM Part No. 6300160 (Qty 18)
Stud, Liner Bushing — OEM Part No. 2408018 (Qty 18)
Nut, Suction to Discharge Module — OEM Part No. 6300241 (Qty 18)
Stud, Suction to Discharge Module — OEM Part No. 2408034 (Qty 18)
Nut, Threaded Ring — OEM Part No. 6300220 (Qty 72)
Stud, Threaded Ring — OEM Part No. 2408019 (Qty 72)
Liner and Cylinder Components:
Bushing, Liner — OEM Part No. 1290165 (Qty 3)
Retainer, Seal — OEM Part No. 1290174 (Qty 6)
Valve Cover — OEM Part No. 1290307 (Qty 6)
Screw, Wedge Adjusting — OEM Part No. 1290178 (Qty 6)
Nut, Wedge Adjusting — OEM Part No. 6300160 (Qty 6)
Washer, Wedge Adjusting — OEM Part No. 1290315 (Qty 6)
Threaded Ring — OEM Part No. 1290308 (Qty 6)
Wedge Assembly — OEM Part No. 1290376 (Qty 6)
Gasket, Valve Cover — OEM Part No. 1540126 (Qty 6)
Valve Assembly and Components:
Holder, Valve Guide — OEM Part No. 1292140 (Qty 6)
Insert, Valve Guide — OEM Part No. 1292141 (Qty 6)
Pin, Dowell — OEM Part No. 6511416 (Qty 6)
Plate, Wear — OEM Part No. 1290357 (Qty 3)
Connectors and Adapters:
Connector, Discharge — OEM Part No. 1290342 (Qty 2)
Screw, Hex Head — OEM Part No. 7000305-11 (Qty 16)
Washer, Lock — OEM Part No. 7619050 (Qty 16)
Adapter, Discharge Connector — OEM Part No. 1290343 (Qty 2)
Seal, Discharge Connector to Adapter — OEM Part No. 2410031-348 (Qty 2)
Seal, Discharge Connector & Adapter — OEM Part No. 2410031-427 (Qty 4)
Liner Clamp Components:
Clamp, Liner — OEM Part No. 1290166 (Qty 3)
Seal, Suction Manifold — OEM Part No. 1590051 (Qty 3)
Materials and Construction:
Each National 10-P-130 part is made from materials selected for demanding oilfield service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with HNBR or polyurethane cups. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.
Key Performance Advantages:
Our National 10-P-130 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The 10-P-130 shares its suction module (1290338) with the 8-P-80 and 9-P-100 models, simplifying inventory management and reducing spare parts costs. The fluid end is available with TAPR-LOK valve covers or fast-change valve covers for reduced maintenance time. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.
Applications:
These parts are suitable for deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.
Compatibility:
All listed parts are direct replacements for National 10-P-130 (10P130) mud pump components. The 10-P-130 shares the suction module (1290338) with the 8-P-80 and 9-P-100 models. No modification is required for installation.
Order Information:
MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.