National 12-P-160 Mud Pump Parts and Spares — Easy Wearing Parts

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 7K National 12-P-160 mud pump parts and spares. Easy wearing parts include liners 4.5 inch to 7.25 inch, pistons, piston rubbers, valve assemblies, valve seats, valve springs, fluid end modules, seals, and piston rods. 1600 HP, 7.5 x 12 inch stroke, 5000/7500 PSI. OEM part numbers available. Contact info@hyrig.com.

Conatct For Details
DetailReview(0)Additional

The National 12-P-160 (12P160) is a 1,600 HP triplex single-acting piston pump with a 7.5 inch x 12 inch (190.5 mm x 304.8 mm) bore and stroke configuration, rated for a maximum working pressure of 5,000 PSI or 7,500 PSI depending on the fluid end configuration. The pump is designed for continuous high-output performance in deep well and ultra-deep well drilling operations. The 12-P-160 is available with both standard 5,000 PSI and high-pressure 7,500 PSI fluid ends, and with standard or “L” shaped module configurations. Our National 12-P-160 mud pump parts and spares are manufactured to API 7K standards and are designed as direct replacements for OEM components.

Easy Wearing Parts for National 12-P-160 with OEM Part Numbers:

Cylinder Liners:

Ceramic Liner 4 inch — Part No. MB40-15

Ceramic Liner 4.5 inch — Part No. MB44-15

Ceramic Liner 5 inch — Part No. 07466500

Ceramic Liner 5.5 inch — Part No. 07466550

Ceramic Liner 6 inch — Part No. 07466600

Ceramic Liner 6.5 inch — Part No. 07466650

Ceramic Liner 7 inch — Part No. 07466700

Supreme Liner 5 inch — Part No. 05466500

Supreme Liner 5.5 inch — Part No. 05466550

Supreme Liner 6 inch — Part No. 05466600

Supreme Liner 6.5 inch — Part No. 05466650

Supreme Liner 7 inch — Part No. 05466700

Liner Gasket — Part No. 07923264 (5 inch), 07923263 (5.5 inch), 07923261 (6 inch), 07923284 (6.5 inch), 07923285 (7 inch)

Pistons and Rubber:

Blue Lightning Piston 4 inch — Part No. 1502052

Blue Lightning Piston 4.5 inch — Part No. 1502054

Blue Lightning Piston 5 inch — Part No. 1502056

Blue Lightning Piston 5.5 inch — Part No. 1502058

Blue Lightning Piston 6 inch — Part No. 1502060

Blue Lightning Piston 6.5 inch — Part No. 1502062

Blue Lightning Piston 7 inch — Part No. 1502064

Green Duo Piston 4 inch — Part No. 012180170

Green Duo Piston 4.5 inch — Part No. 012180197

Green Duo Piston 5 inch — Part No. 012180254

Green Duo Piston 5.5 inch — Part No. 012180338

Green Duo Piston 6 inch — Part No. 012180395

Green Duo Piston 6.5 inch — Part No. 012180536

Green Duo Piston 7 inch — Part No. 012180619

White Lightning Piston 4 inch — Part No. 015180102

White Lightning Piston 4.5 inch — Part No. 015180145

White Lightning Piston 5 inch — Part No. 015180186

White Lightning Piston 5.5 inch — Part No. 015180228

White Lightning Piston 6 inch — Part No. 015180269

White Lightning Piston 6.5 inch — Part No. 015180301

White Lightning Piston 7 inch — Part No. 015180343

Valve Assembly and Components:

Valve White Lightning Insert (Roughneck) — Part No. 9700367

Valve White Lightning Insert (Roughneck HP) — Part No. 9700359

Valve Urethane Insert (Roughneck) — Part No. 9700285

Valve Urethane Insert (Roughneck HP) — Part No. 9700353

Valve Rubber Insert — Part No. 9702601

Valve Seat (Roughneck) — Part No. 9702555

Valve Seat (Mission L) — Part No. 9702555

Valve Spring — Part No. 8201684

Valve Spring Stainless — Part No. 80502100

Valve Insert Urethane — Part No. 9705090

Valve Cover — Part No. 07916771

Valve Cover Gasket — Part No. 1540126

Fluid End Modules (L-Shaped):

Complete Assembly — OEM Part No. 8467-A (Qty 3)

Fluid Module, Discharge – Studded (Includes Items 1–4) — OEM Part No. 8467-1 (Qty 3)

Stud with Nut, Frame — OEM Part No. 4015-96 (Qty 30)

Stud with Nut, Discharge Manifold — OEM Part No. 4017-1 (Qty 18)

Stud with Nut, Valve Cover — OEM Part No. 4015-5 (Qty 72)

Fluid Module, Suction – Studded (Includes Items 4–5) — OEM Part No. 8467-2 (Qty 3)

Seal, Suction Manifold — OEM Part No. 8488-5 (Qty 3)

Dowel Pin — OEM Part No. 1590051 (Qty 6)

Threaded Flange — OEM Part No. 4467 (Qty 6)

Screw Gland — OEM Part No. 4567 (Qty 6)

Valve Cover Plug Assembly (Includes Items 10–13) — OEM Part No. 4667-A (Qty 6)

Plug, Valve Cover — OEM Part No. 4667 (Qty 6)

Valve Guide Screw — OEM Part No. 4760-3 (Qty 16)

Valve Guide Insert — OEM Part No. 4016-98 (Qty 6)

Seal, Valve Cover Plug — OEM Part No. 4700-I (Qty 6)

Liner Retainer Flange — OEM Part No. P128 (Qty 3)

Capscrew, Liner Retainer — OEM Part No. 6495 (Qty 18)

Nut, Liner Retainer — OEM Part No. 4017-8 (Qty 3)

Plate, Wear — OEM Part No. 6595 (Qty 3)

Seal, Module and Wear Plate — OEM Part No. 2988 (Qty 3)

Materials and Construction:

Each National 12-P-160 part is made from materials selected for demanding high-pressure drilling service. Fluid end modules use high-strength alloy forged steel. Liners use forged steel outer sleeves and high-chromium cast iron inner sleeves, or ceramic for extended life. Pistons use high-strength steel cores with HNBR, urethane, or rubber cups in Blue Lightning, Green Duo, and White Lightning configurations. Valve bodies and seats use forged alloy steel with advanced heat treatment. Seals use NBR or HNBR rubber. All parts are precision machined to ensure proper fit and reliable performance.

Key Performance Advantages:

Our National 12-P-160 mud pump parts and spares offer high wear resistance, reliable sealing, and long service life. The 12-P-160 is available with both 5,000 PSI and 7,500 PSI fluid end configurations to suit different drilling requirements. The L-shaped fluid end design features separate discharge and suction modules that are interchangeable on the same pump. Parts are compatible with water-based, oil-based, and synthetic drilling fluids.

Applications:

These parts are suitable for deep well drilling, ultra-deep well drilling, high-pressure drilling, land and offshore rigs, well service, and workover operations.

Compatibility:

All listed parts are direct replacements for National 12-P-160 (12P160) mud pump components. The 12-P-160 shares numerous fluid end components with the 10-P-130 and 14-P-220 models where noted. No modification is required for installation.

Order Information:

MOQ: 5 pieces or sets, depending on the part. Custom materials, colors, and branding available. Standard export packaging. Delivery from stock or short lead time. For pricing, technical data sheets, or OEM inquiries, please contact us at info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit