Product Name: Nose, Impeller (2 Flat lon Nitride)
Part Numbers: 24025-03-25L | 662014054
This heavy-duty impeller nose with two-flat design and ion nitride surface treatment is engineered for Mission Magnum XP series pumps (M.S.24036 / 658416102) and is 100% interchangeable with Sandman MCM XL and TSC PF pump impeller noses. The component installs on the impeller eye (suction side) to protect against abrasive wear. The two-flat design provides anti-rotation locking, and the ion nitride (lon nitride) hardening significantly increases surface hardness and wear resistance.
Key Specifications
Design: Two parallel flats (anti-rotation)
Surface treatment: Ion nitride (lon nitride) – high hardness, low friction
Base material: High-chrome white iron or alloy steel
Function: Protects impeller eye, reduces recirculation loss
Compatible with MECH. SEAL assemblies (24036 / 658416102)
Fits pump size: 8x6x18 (8" suction, 6" discharge, 18" impeller)
Material & Durability
The base material is high-chrome alloy for erosion resistance, enhanced by an ion nitride case hardening process. This produces a very hard, wear-resistant surface that withstands extreme abrasion from sand, ore, and drilling solids while maintaining a tough core. The two-flat design prevents loosening under high torque.
Interchangeability
Direct replacement for Mission Magnum XP 8x6x18 pumps (MECH. SEAL 24036 / 658416102)
Also fits Sandman MCM XL and TSC PF impeller nose sockets without modification
Same flat dimensions, outer diameter, and thickness as OEM
Performance & Applications
The ion nitride impeller nose is a premium wear part that significantly extends service life in severe applications. Typical applications include:
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and slurry transfer
Mineral processing pumps
Wastewater treatment with highly abrasive solids
Why choose this impeller nose?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF (MECH. SEAL 24036 / 658416102)
Part numbers: 24025-03-25L, 662014054
Ion nitride hardened surface for maximum wear life
Two-flat design prevents loosening
Outlasts standard impeller noses in severe abrasion
Reduces impeller wear and unplanned downtime
For technical drawings, hardness test reports, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.