Product Name: Nose, Impeller (Two Flat Design)
Part Numbers: 24025-01-25L | 652309600
This heavy-duty impeller nose with two-flat design is engineered for Mission Magnum XP series pumps (M.S.24036 / 658416102) and is 100% interchangeable with Sandman MCM XL and TSC PF pump impeller noses. The component installs on the impeller eye (suction side) to protect against abrasive wear and maintain hydraulic efficiency. The two-flat design provides positive anti-rotation locking.
Key Specifications
Design: Two parallel flats (anti-rotation)
Material: High-chrome white iron or equivalent wear-resistant alloy
Function: Protects impeller eye, reduces recirculation loss
Compatible with MECH. SEAL assemblies (24036 / 658416102)
Fits pump size: 8x6x18 (8" suction, 6" discharge, 18" impeller)
Material & Durability
Cast from high-chrome alloy, the impeller nose withstands severe erosion from sand, ore, and drilling solids. The two-flat design prevents spinning or loosening under high torque and vibration.
Interchangeability
Direct replacement for Mission Magnum XP 8x6x18 pumps (MECH. SEAL 24036 / 658416102)
Also fits Sandman MCM XL and TSC PF impeller nose sockets without modification
Same flat dimensions, outer diameter, and thickness as OEM
Performance & Applications
The impeller nose is a sacrificial wear part that extends impeller life. Typical applications include:
Oil & gas hydraulic fracturing (frac pumps)
Mine dewatering and slurry transfer
Mineral processing pumps
Wastewater treatment with abrasive solids
Why choose this impeller nose?
OEM fit for Mission Magnum XP / Sandman MCM XL / TSC PF (MECH. SEAL 24036 / 658416102)
Part numbers: 24025-01-25L, 652309600
High-chrome iron for maximum erosion resistance
Two-flat design prevents loosening
Reduces impeller wear and downtime
For technical drawings, material certification, or bulk orders:
info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.