HYRIG can supply a compatible replacement for the NOV BX4-50 hydraulic elevator. The NOV BX4-50 is a double-door hydraulic elevator rated at 500 sTon (454 Tonne) for 2⅜–9⅞ in. (60.3–247.7 mm) pipe.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Compatible BX4-50 Replacement |
|---|---|
| Load Rating | 500 sTon (454 Tonne) |
| Size Range | 2⅜–9⅞ in. (60.3–247.7 mm) |
| Weight (w/o bushings) | 2,039 lbs (924 kg) |
| Link Type (Min) | 350 sTon |
| Link Type (Max) | 750 sTon |
| Replacement Compatibility | Replaces NOV BX4-50 configurations |
Data source: Technical data and parts list.
| Parameter | BX4-50 Value |
|---|---|
| 18" Tool Joint Rating | 500/453 sTon/Tonne |
| 90" Coupling Rating | 500/453 sTon/Tonne |
| 45" Coupling Rating | 500/453 sTon/Tonne |
Explore the higher-load replacement: NOV BX5 Elevator Compatible Replacement. For full series, see NOV Hydraulic Elevators Compatible Replacements.
Data source: Technical data and parts list.
| Dimension | BX4-50 Value |
|---|---|
| Size Range (inches) | 2.3/8 - 9.7/8 |
| Size Range (mm) | 60.3 - 247.7 |
This compatible replacement uses internal hydraulic cylinders for actuation, matching the operating principle of the original NOV BX4-50. Spring-loaded pins lock the bushings in place for quick removal. The safety lock prevents the elevator from opening under load.
Looking to replace a NOV BX4-50? Check these points before ordering:
Used with top drives, rotary tables, and standard drill pipe handling systems.
Used for lifting and handling drill pipe, drill collars, and casing during drilling operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure if this compatible replacement will fit your NOV BX4-50 setup? Tell us your pipe OD and link configuration. Our engineers will verify the bushing requirements before you order.
Q: Is this an original NOV product?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: Will this replacement accept standard NOV BX4-50 bushings?
A: The replacement is designed to accept standard NOV BX4-50 bushings.
Q: What is the maximum pipe size for the BX4-50 replacement?
A: It handles pipe up to 9⅞ in. (247.7 mm).
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV BX4-50 compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.