HYRIG can supply a compatible replacement for the NOV BX5 hydraulic elevator. The NOV BX5 is a double-door hydraulic elevator rated at 750 sTon (680 Tonne) for 3½–11 in. (88.9–279.4 mm) pipe.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Compatible BX5 Replacement |
|---|---|
| Load Rating | 750 sTon (680 Tonne) |
| Size Range | 3½–11 in. (88.9–279.4 mm) |
| Weight (w/o bushings) | 3,295 lbs (1,495 kg) |
| Link Type (Min) | 750 sTon |
| Link Type (Max) | 1,250 sTon |
| Replacement Compatibility | Replaces NOV BX5 configurations |
Data source: Technical data and parts list.
| Parameter | BX5 Value |
|---|---|
| 18" Tool Joint Rating | 750/680 sTon/Tonne |
| 90" Coupling Rating | 1,000/907 sTon/Tonne |
| 45" Coupling Rating | 1,000/907 sTon/Tonne |
Explore the lighter-load replacement: NOV BX4-50 Elevator Compatible Replacement. For full series, see NOV Hydraulic Elevators Compatible Replacements.
Data source: Technical data and parts list.
| Dimension | BX5 Value |
|---|---|
| Size Range (inches) | 3.1/2 - 11 |
| Size Range (mm) | 88.9 - 279.4 |
This compatible replacement uses internal hydraulic cylinders for actuation. Spring-loaded pins lock the bushings in place for quick removal. The safety lock prevents the elevator from opening under load.
Looking to replace a NOV BX5? Check these points before ordering:
Used with top drives, rotary tables, and standard drill pipe handling systems.
Used for lifting and handling drill pipe, drill collars, and casing during drilling operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure if this compatible replacement will fit your NOV BX5 setup? Tell us your pipe OD and link configuration. Our engineers will verify the bushing requirements before you order.
Q: Is this an original NOV product?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: Will this replacement accept standard NOV BX5 bushings?
A: The replacement is designed to accept standard NOV BX5 bushings.
Q: What is the maximum pipe size for the BX5 replacement?
A: It handles pipe up to 11 in. (279.4 mm).
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV BX5 compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.