HYRIG can supply compatible replacements for NOV hydraulic and FMS control panels. These panels are designed to operate power tools and flush mounted slips.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Hydraulic Stand Alone Panel | FMS Control Panel |
|---|---|---|
| Max Pressure | 2,500 psi (17,237 kPa) | 2,500 psi (17,237 kPa) |
| Max Flow | 50 gpm (190 lpm) | 50 gpm (190 lpm) |
| Weight | 450 lbs (200 kg) | 220 lbs (100 kg) |
| Compatibility | BX tools, FMS275/375, PS21/30 | FMS and power tongs |
Data source: Technical data and parts list.
| Parameter | Hydraulic Stand Alone Panel | FMS Panel |
|---|---|---|
| Dimensions (LxWxH) | 47.5 x 27.6 x 19.7 in. | 16.22 x 18.15 x 15.55 in. |
| Interlock Function | Elevator and rotary spider | N/A |
| Dimension | Hydraulic Panel | FMS Panel |
|---|---|---|
| Length | 47.5 in. | 16.22 in. |
| Width | 27.6 in. | 18.15 in. |
| Height | 19.7 in. | 15.55 in. |
The panels control hydraulic flow to operate BX tools, rotary spiders, or FMS slips. The FMS panel allows control of both the FMS and power tong without power fluctuations.
Looking to replace a NOV control panel? Check these points before ordering:
These replacements are compatible with standard rotary drilling rigs and power tool systems.
Used to control hydraulic power tools and slips during drilling and casing running operations.
Disclaimer: HYRIG supplies hydraulic control equipment for industrial applications. Please verify local safety regulations before use.
Not sure which panel fits your rig? Tell us which tools you need to operate. Our engineers will verify the correct replacement before you order.
Q: Are these original NOV control panels?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What tools can the hydraulic stand-alone panel operate?
A: It can operate BX tools, FMS275, FMS375, PS21, PS30, and hydraulic elevators/spiders.
Q: Does the FMS panel require a separate power source?
A: The FMS panel connects to the rig's hydraulic power unit.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV control panel compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.