HYRIG can supply compatible replacements for the NOV MPCH, MSPC, and MSP master bushings. These master bushings are designed for pin drive rotary tables and handle drill pipe, drill collars, tubing, and casing.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | MPCH Compatible Replacement | MSPC Compatible Replacement |
|---|---|---|
| Rotary Size | 37½ in. | 27½ in. |
| Load Rating | 750 sTon (680 Tonne) | 750 sTon (680 Tonne) |
| Body Type | Hinged | Solid |
| Insert Bowl Range | 2⅜–13⅜ in. | 2⅜–13⅜ in. |
Data source: Technical data and parts list.
| Insert Bowl No. | MPCH Size Range | MSPC Size Range |
|---|---|---|
| No. 1 | 11¾–13⅜ in. | 11¾–13⅜ in. |
| No. 2 | 9⅝–10¾ in. | 9⅝–10¾ in. |
| No. 3 | API 8⅝ and smaller | API 8⅝ and smaller |
| Dimension | MPCH Value | MSPC Value |
|---|---|---|
| Rotary Size | 37.1/2 in. | 27.1/2 in. |
The master bushings provide the interface between the rotary table and the slips. The MPCH is hinged for floating and semi-submersible drilling operations, while the MSPC is a solid body.
Looking to replace a NOV master bushing? Check these points before ordering:
These replacements are compatible with standard pin drive rotary tables.
Used to support the slips and transmit torque to the drill string during drilling operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which master bushing fits your rotary table? Tell us your table size and pipe range. Our engineers will verify the correct model before you order.
Q: Are these original NOV master bushings?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the difference between MPCH and MSPC?
A: MPCH is a 37½-inch hinged master bushing. MSPC is a 27½-inch solid master bushing.
Q: Can I use standard NOV insert bowls with these replacements?
A: The replacements are designed to accept standard NOV insert bowl configurations.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV master bushing compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.