NOV Elevator Parts | BX Series Replacement Bushings & Guides

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply compatible replacement parts for NOV BX series hydraulic elevators. Find bushings, insert carriers, and wear components for your specific model.
Conatct For Details
DetailReview(0)Additional

NOV Elevator Parts | BX Series Replacement Bushings & Guides

HYRIG can supply compatible replacement parts for NOV BX series hydraulic elevators. Keep your operations running with drop-in replacement bushings, insert carriers, and guide plates.

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Key Facts

ComponentAvailability
Bushing TypesCasing, Drill Pipe, Drill Collar
CompatibilityNOV BX4-50 and BX5 elevators
Insert CarriersVarious pipe sizes
Guide PlatesTop and bottom kits

Data source: Technical data and parts list.

Compatible Host Models

These parts are compatible replacements for the following models:

BX4-50 Compatible Bushings

Part No.TypeSize (in.)
50005351Y158Tubing2⅜
50005351Y160Tubing2⅞
50005351Y162Tubing3½
50005351Y164Tubing4
50005351Y129Casing4½
50005351Y131Casing5
50005351Y132Casing5½
50005351Y135Casing6⅝

Cross-Reference & Replacement

Replacing worn parts? Check these points before ordering:

  1. Model: Confirm whether your elevator is a BX4-50 or BX5.
  2. Pipe size: Match the bushing to your exact pipe OD.
  3. Part number: Verify the part number against your original equipment.

Applications

These replacement parts are used to maintain compatible BX series elevators in drilling operations.

Disclaimer: HYRIG supplies lifting equipment parts for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Selection Support

Not sure which bushing matches your pipe? Provide your elevator model (BX4-50 or BX5) and pipe OD. Our engineers will verify the correct components before you order.

Frequently Asked Questions

Q: Are these original NOV parts?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.

Q: How do I know which bushing to order?
A: Match the bushing size to your exact pipe OD. For example, 5-inch casing uses bushing 50005351Y131.

Q: Can I use BX4-50 bushings in a BX5 elevator?
A: No. BX4-50 and BX5 use different bushing sets. Verify your model before ordering.

Q: What is the typical lead time for replacement parts?
A: Lead time depends on stock status. Contact HYRIG with your part numbers and quantity.

Contact

For NOV elevator replacement parts, contact HYRIG: info@hyrig.com

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit