NOV Safety Clamps Compatible Replacement | MP Series

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply compatible replacements for the NOV MP series safety clamps. The MP series are multipurpose safety clamps designed to secure flush tubular products during installation.
Conatct For Details
DetailReview(0)Additional

NOV Safety Clamps Compatible Replacement | MP Series

HYRIG can supply compatible replacements for the NOV MP series safety clamps. The MP series are multipurpose safety clamps designed to secure flush tubular products during installation.

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Key Facts

ParameterMP-S / MP-R / MP-M / MP-L / MP-XL
TypeMultipurpose Safety Clamps
Size Range2⅞–30½ in.
ApplicationDrill collars, casing, flush tubulars
AdjustmentAdd or remove links
Replacement CompatibilityReplaces NOV MP series configurations

Data source: Technical data and parts list.

Key Specifications & Size Ranges

ModelSize Range (inches)Clamp Weight (lbs)
MP-S2⅞–4⅛, 4–583–91
MP-R4½–5⅝, 5½–781–89
MP-M10½–14¾121–153
MP-L15⅞–19⅜173–189
MP-XL19⅜–30½196–336

Dimensions

DimensionValue
Max Pipe Opening30½ in. (Not to exceed)

Structure / Working Principle

The safety clamp consists of individual links flexibly hinged together, creating uniform gripping pressure. It can be adjusted to any diameter by adding or removing links.

Cross-Reference & Replacement

Looking to replace a NOV safety clamp? Check these points before ordering:

  1. Pipe size: Ensure the clamp size range matches your tubular OD.
  2. Link count: Verify how many links your current setup uses.
  3. Safety warning: MP clamps should NOT be used for snubbing or lifting operations.

Compatible Host Models

Used with standard rotary drilling rigs and casing running operations.

Applications

Used as a last resort to secure flush tubular products and prevent them from slipping through the slips.

Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Selection Support

Not sure which clamp size fits your tubulars? Tell us your pipe OD. Our engineers will verify the correct model before you order.

Frequently Asked Questions

Q: Are these original NOV safety clamps?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.

Q: Can MP clamps be used for lifting?
A: No. MP clamps should NOT be used for snubbing or lifting operations.

Q: How do I adjust the clamp for different pipe sizes?
A: The clamp is adjusted by adding or removing links. Each link changes the effective gripping diameter by 1 inch.

Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.

Contact

For NOV safety clamp compatible replacements, contact HYRIG: info@hyrig.com

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit