HYRIG can supply a compatible replacement for the NOV SDXL extra-long rotary slips. The NOV SDXL is designed for high-load drilling, providing extra contact length on the pipe to prevent slip marks.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Compatible SDXL Replacement |
|---|---|
| Type | Extra Long Rotary Slips |
| Slip Body Sizes | 4½, 5, 5½, 7 in. |
| Insert Types | Straight or Beveled |
| Replacement Compatibility | Replaces NOV SDXL configurations |
| Load Application | High-load drilling |
Data source: Technical data and parts list.
| Slip Body Size (in.) | Pipe Sizes (in.) | Weight w/ Inserts (lbs) | Insert Set PN |
|---|---|---|---|
| 4½ | 3½, 4 | 229 | 2163-54 |
| 4½ | 4½ | 219 | 2164-54 |
| 5 | 4, 4½ | 205 | 2165-54 |
| 5 | 5 | 237 | 2168-54 |
| 5½ | 4½, 5 | 227 | 2166-54 |
| 5½ | 5½ | 213 | 2167-54 |
| 7 | 5, 5½, 5¾, 6, 6⅝, 7 | 242 / 252 / 220 / 242 / 232 | 2656, 2632, 2172, 2173 |
Explore the full slip range: NOV Rotary Slips Compatible Replacements.
Data source: Technical data and parts list.
| Dimension | SDXL Value |
|---|---|
| Slip Body Sizes | 4½, 5, 5½, 7 in. |
These compatible slips are extra-long to provide more contact length on the pipe, reducing the risk of crushing or marking. They use various insert sets (straight or beveled) depending on the pipe size.
Looking to replace a NOV SDXL? Check these points before ordering:
These replacements are compatible with standard API master bushings and rotary tables.
Used to grip and suspend the drill string in the rotary table during high-load drilling operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which SDXL insert set matches your pipe? Tell us your pipe OD and required load. Our engineers will verify the correct components before you order.
Q: Is this an original NOV product?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the difference between SDML and SDXL?
A: SDXL is an extra-long slip providing more contact length for high-load drilling, while SDML is a medium-length slip.
Q: What insert set should I use for 5-inch pipe?
A: For a 5-inch slip body, use insert set 2168-54.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV SDXL compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.