HYRIG can supply compatible replacements for the NOV SDS, SDML, and SDXL rotary slips. These slips are designed to grip and suspend drill pipe and drill collars in API standard bowls.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | SDS Compatible Replacement | SDML Compatible Replacement | SDXL Compatible Replacement |
|---|---|---|---|
| Type | Short Rotary Slips | Medium Rotary Slips | Extra Long Rotary Slips |
| Pipe Size Range | 2⅜–4½ in. | 2⅜–5½ in. | 3⅜–7 in. |
| Insert Types | Various | Various | Various |
| Application | Standard loads | Medium loads | High loads |
Data source: Technical data and parts list.
| Parameter | SDS Slip Body | SDML Slip Body | SDXL Slip Body |
|---|---|---|---|
| Slip Body Sizes | 2⅜, 3⅛, 3½, 4, 4½ in. | 3½, 4½, 5, 5½ in. | 4½, 5, 5½, 7 in. |
Explore the high-load model: NOV SDXL Rotary Slips Compatible Replacement.
| Dimension | SDS Value | SDML Value | SDXL Value |
|---|---|---|---|
| Max Pipe Size | 4½ in. | 5½ in. | 7 in. |
These compatible slips are manufactured to match the API taper and fit standard bowls. SDS is for standard loads, SDML for medium loads, and SDXL is an extra-long slip for heavier loads, providing more contact length on the pipe.
Looking to replace your existing NOV slips? Check these points before ordering:
These replacements are compatible with standard API master bushings and rotary tables.
Used to grip and suspend the drill string in the rotary table during drilling operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which slip fits your pipe and load? Tell us your pipe OD and expected string weight. Our engineers will verify the correct model before you order.
Q: Are these original NOV slips?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the difference between SDS, SDML, and SDXL?
A: SDS is a short slip for standard loads. SDML is a medium slip. SDXL is an extra-long slip designed for heavier loads and larger pipe sizes.
Q: Will these slips fit standard API bowls?
A: Yes, they are designed to fit standard API bowls.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV rotary slips compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.