Q: What is the difference between the 1320-UE and 1320-UDBE?
A: Both are 2000 HP DC chain-drive drawworks in the National 1320 family. They share the core platform but differ in clutch, brake and control arrangement. Many wear components are dimensionally matched; confirm fitment by installed position and reference P/N.
Q: What is the difference between the E-2000 and E-3000?
A: Both are in the Oilwell / Ideco E-series. The E-2000 is typically a 2000 HP unit with 2 x GE 752 motors; the E-3000 is typically a 3000 HP class unit with 3 x GE 752 motors. Confirm the actual motor count and HP class on your unit.
Q: Can the E-2000 replace a National 1320-UE?
A: They are different product lines. Motor mounting, drum geometry and brake interfaces differ. Do not assume drop-in interchangeability; confirm the rig interface and replacement scope before selection.
Q: Can I order parts by P/N alone?
A: A reference P/N is a starting point, not a fitment guarantee. Provide the drawworks model, serial/configuration, and a photo of the installed position so HYRIG can confirm the correct replacement.
Q: Are 1320-UE and 1320-UDBE parts fully interchangeable?
A: Do not assume full interchangeability. Selected components may fit, but confirm by installed position, dimensions and reference P/N before order.
Q: Does HYRIG manufacture these parts?
A: HYRIG is a China-based supplier of replacement parts and drilling equipment. Components are sourced and manufactured to match the required dimensions and specifications; confirm the applicable standard and certification requirement before order.
Safety note: Drawworks are heavy-lifting and high-pressure systems. Selection, installation, operation, and maintenance must be performed by qualified personnel in accordance with applicable industry standards, local regulations, and the manufacturer operating instructions.
Not sure which model or replacement part fits your rig? Send HYRIG the nameplate data, motor configuration, drum grooving, and a photo of the installed component. HYRIG will confirm the suitable model scope and replacement list before quotation.
For NOV drawworks selection and replacement parts, contact HYRIG: info@hyrig.com