| Host parameter | 1320-UE / 1320-UDBE | E-2000 |
|---|---|---|
| Rated horsepower | 2000 HP | 2000 HP |
| Drive type | DC chain drive | DC chain drive |
| Typical motors | 2 x GE 752 | 2 x GE 752 |
| Auxiliary brake | Elmagco 7838 common | Elmagco 7838 common |
| Product line | National 1320 family | Oilwell E-series |
Host specifications are for preliminary matching. Confirm the exact host model and installed position before ordering parts.
| System | Reference components | Reference P/N | Model coverage |
|---|---|---|---|
| Clutch & friction | High-speed clutch capsule; friction discs; diaphragms | 622835; 622836 / 627688; 618870-C | 1320-UE, 1320-UDBE |
| Brake system | Brake arm bushings; holding/emergency brake valves | 2110490 / 2110491; 7500537 / 2110255 | 1320-UE, 1320-UDBE, E-2000 |
| Seals & O-rings | Oil seals; O-rings | YS-2620 / YS-4752; 2410021-337 | All covered models |
| Bearings & drive | Spherical roller bearings; inner/outer races | ZS3933 / ZS4720; 622923 / 622924 | All covered models |
| Air control | Quick-release valves; diaphragms | 7500254; 622845 | 1320 family, E-2000 |
Reference P/Ns are for identification only. Not all P/Ns apply to every model and configuration. Confirm with HYRIG before order.
Replacing a worn component starts with matching the installed configuration, not only the drawworks model. Check these points before ordering:
HYRIG can review photos and dimensions to match the correct replacement part or maintenance kit. Do not order by model number alone when the part-level P/N is unavailable or illegible.
Not sure which clutch capsule, friction disc, seal kit or brake component fits your drawworks? Send the model, serial/configuration, a photo of the installed part, and key dimensions. HYRIG will confirm the correct replacement by system and configuration before quotation.
These replacement parts are intended for NOV drawworks models used in hoisting operations on land and offshore drilling rigs in the 1000 HP to 3000 HP class. Confirm the exact host model and installed position before ordering.
Safety note: Drawworks are heavy-lifting and high-pressure systems. Selection, installation, operation, and maintenance must be performed by qualified personnel in accordance with applicable industry standards, local regulations, and the manufacturer operating instructions.
Q: Can I order NOV drawworks parts by P/N?
A: Reference P/Ns are provided for identification. Confirm the exact fitment by drawworks model, serial/configuration, and installed position before order.
Q: Are 1320-UE and 1320-UDBE parts interchangeable?
A: Many wear components are dimensionally matched, but clutch, brake and seal fitment must be verified by installed position and reference P/N. Do not assume full interchangeability.
Q: Do you supply complete assemblies and individual wear components?
A: HYRIG supplies replacement assemblies, wear components and maintenance kits. Confirm the required scope before order.
Q: Does HYRIG manufacture these parts?
A: HYRIG is a China-based supplier of replacement parts and drilling equipment. Components are sourced and manufactured to match the required dimensions and specifications; confirm the applicable standard and certification requirement before order.
Safety note: Heavy-lifting and high-pressure equipment. Only qualified personnel should select, install, or maintain drawworks components.
For NOV drawworks replacement parts, contact HYRIG: info@hyrig.com