| Model | Product line | HP class | Drive type | Typical motor configuration |
|---|---|---|---|---|
| 1320-UE | National | 2000 HP | DC chain drive | 2 x GE 752, 1000 HP each |
| 1320-UDBE | National | 2000 HP | DC chain drive | 2 x GE 752, 1000 HP each |
| E-2000 | Oilwell | 2000 HP | DC chain drive | 2 x GE 752, 1000 HP each |
| E-3000 | Ideco / Oilwell | 3000 HP class (up to 4000 HP configurable) | DC chain drive | 3 x GE 752, 1000 HP each typical |
| 1000-UDB | National / Dreco | 1000 HP class | DC chain drive | Confirm by specific unit configuration |
Specifications are for preliminary selection. Confirm final configuration, motor arrangement and replacement-part fitment with HYRIG before order.
Outline dimensions vary by model, drum grooving and skid/base arrangement. The items that most directly affect selection and replacement fitment are:
| Item | What to confirm |
|---|---|
| Drum grooving | Lebus or helical; line size compatibility |
| Motor interface | GE 752 mounting and coupling arrangement |
| Brake mounting | Elmagco 7838 or alternative brake interface |
| Skid/base | Land or offshore skid dimensions |
| Variant designation | UE vs UDBE vs UDB, or E-2000 vs E-3000 |
For dimension-critical replacement or overhaul planning, send the unit serial number and drum/motor/brake configuration to HYRIG for confirmation.
The covered drawworks are single-drum, DC chain-drive units. Power from GE 752 traction motors is transmitted through the chain drive to the drum for hoisting. An auxiliary brake such as the Elmagco 7838 provides supplementary braking during tripping and holding operations. The National 1320 family and the Oilwell E-series differ in motor mounting, drum geometry and brake interfaces, so replacement components must be matched by product line and model, not by HP class alone.
When comparing across the series:
HYRIG can review photos, dimensions and the installed P/N to confirm whether a component is a drop-in replacement or requires adaptation.
Not sure which drawworks model or replacement-part system matches your rig? Send the nameplate data, motor configuration, drum grooving and a photo of the installed component. HYRIG will confirm the suitable model scope and replacement-part list before quotation.
Used for hoisting operations on land and offshore drilling rigs across the 1000 HP to 3000 HP class. Suitable for drilling and workover applications where a DC chain-drive drawworks is specified.
Safety note: Drawworks are heavy-lifting and high-pressure systems. Selection, installation, operation, and maintenance must be performed by qualified personnel in accordance with applicable industry standards, local regulations, and the manufacturer operating instructions.
HYRIG supplies replacement parts for the covered drawworks models by system. Reference P/Ns are for identification; confirm exact fitment by model, serial/configuration, and installed position before order.
| System | Reference components | Model coverage |
|---|---|---|
| Clutch & friction | High-speed clutch capsule; friction discs; diaphragms | 1320-UE, 1320-UDBE, E-2000 |
| Brake system | Brake arm bushings; holding/emergency brake valves | 1320-UE, 1320-UDBE, E-2000, E-3000 |
| Seals & O-rings | Oil seals; O-rings | All covered models |
| Bearings & drive | Spherical roller bearings; inner/outer races | All covered models |
| Air control | Quick-release valves; diaphragms | 1320 family, E-2000 |
Reference components are for identification only. Confirm with HYRIG before order.
Q: Which NOV drawworks models does HYRIG cover?
A: The series overview covers 1320-UE, 1320-UDBE, E-2000, E-3000 and 1000-UDB.
Q: How do I choose between the National 1320 family and the Oilwell E-series?
A: Match the product line first: National 1320 family vs Oilwell / Ideco E-series. Then confirm HP class, motor count and brake interface against your rig configuration.
Q: Are replacement parts interchangeable across models with the same HP class?
A: Not automatically. Many wear components are dimensionally matched, but clutch, brake and seal fitment must be verified by model, serial/configuration and installed position.
Q: Does HYRIG manufacture these parts?
A: HYRIG is a China-based supplier of replacement parts and drilling equipment. Components are sourced and manufactured to match the required dimensions and specifications; confirm the applicable standard and certification requirement before order.
Safety note: Heavy-lifting and high-pressure equipment. Only qualified personnel should select, install, or maintain drawworks components.
For NOV drawworks series selection and replacement parts, contact HYRIG: info@hyrig.com