| Parameter | NOV E-2000 |
|---|---|
| Rated horsepower | 2000 HP |
| Drive type | DC chain drive |
| Typical motors | 2 x GE 752, 1000 HP each |
| Auxiliary brake | Elmagco 7838 (common configuration) |
| Product line | Oilwell E-series |
| Variant | E-2000 |
Specifications are for preliminary selection. Confirm final configuration and P/N fitment with HYRIG before order.
Full outline dimensions vary across E-2000 configurations. The items that most directly affect fitment and replacement selection are:
| Item | What to confirm |
|---|---|
| Drum grooving | Lebus or helical; line size compatibility |
| Motor interface | GE 752 mounting and coupling arrangement |
| Clutch arrangement | E-series clutch element and hub configuration |
| Brake mounting | Elmagco 7838 or alternative brake interface |
| Skid/base | Land or offshore skid dimensions |
For dimension-critical replacement or overhaul planning, send the unit serial number and drum/motor/brake configuration to HYRIG for confirmation.
The E-2000 is a single-drum, DC chain-drive drawworks. Power from the GE 752 traction motors is transmitted through the chain drive to the drum for hoisting. The Elmagco 7838 auxiliary brake provides supplementary braking during tripping and holding operations. The E-2000 shares the 2000 HP class with the National 1320 family but differs in motor mounting, drum geometry and brake interfaces; replacement components must be matched by product line and model, not by HP class alone.
The E-2000 sits in the 2000 HP drawworks tier alongside the National 1320-UE and 1320-UDBE. When cross-referencing or selecting a replacement:
HYRIG can review photos, dimensions and the installed P/N to confirm whether a component is a drop-in replacement or requires adaptation.
Not sure whether your unit is an E-2000 or E-3000, or which replacement P/N fits your configuration? Send the nameplate data, a photo of the installed component, and the drum/motor/brake arrangement. HYRIG will confirm the correct replacement scope before quotation.
Used for hoisting operations on land and offshore drilling rigs in the 2000 HP class. Suitable for drilling and workover applications where a DC chain-drive drawworks is specified.
Safety note: Drawworks are heavy-lifting and high-pressure systems. Selection, installation, operation, and maintenance must be performed by qualified personnel in accordance with applicable industry standards, local regulations, and the manufacturer operating instructions.
HYRIG supplies replacement parts for the NOV E-2000 by system. Reference components are listed for identification; confirm exact fitment by model, serial/configuration, and installed position before order.
| System | Reference components |
|---|---|
| Clutch & friction | Clutch elements; friction discs; diaphragms |
| Brake system | Brake arm bushings; holding/emergency brake valves |
| Seals & gaskets | Gaskets; O-rings; oil seals |
| Bearings & drive | Bearings; inner/outer races; shafts |
| Air control | Quick-release valves; diaphragms |
Reference components are for identification only. Confirm with HYRIG before order.
Q: What is the difference between the E-2000 and the National 1320 family?
A: Both are 2000 HP DC chain-drive drawworks, but they are different product lines. Motor mounting, drum geometry and brake interfaces differ; replacement components must be matched by product line and model.
Q: What motors are typical on an E-2000?
A: Two GE 752 traction motors, 1000 HP each, are commonly listed. Confirm the actual motor configuration on your unit.
Q: Can I order parts by P/N alone?
A: A reference P/N is a starting point, not a fitment guarantee. Provide the drawworks model, serial/configuration, and a photo of the installed position so HYRIG can confirm the correct replacement.
Q: Does HYRIG manufacture these parts?
A: HYRIG is a China-based supplier of replacement parts and drilling equipment. Components are sourced and manufactured to match the required dimensions and specifications; confirm the applicable standard and certification requirement before order.
Safety note: Heavy-lifting and high-pressure equipment. Only qualified personnel should select, install, or maintain drawworks components.
For NOV E-2000 drawworks selection and replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.