| Parameter | NOV 1320-UDBE |
|---|---|
| Rated horsepower | 2000 HP |
| Drive type | DC chain drive |
| Typical motors | 2 x GE 752, 1000 HP each |
| Auxiliary brake | Elmagco 7838 (common configuration) |
| Drill line | 1-1/2 in (confirm drum grooving) |
| Product line | National 1320 family |
| Variant | UDBE |
Specifications are for preliminary selection. Confirm final configuration and P/N fitment with HYRIG before order.
Full outline dimensions vary across 1320-UDBE configurations. The items that most directly affect fitment and replacement selection are:
| Item | What to confirm |
|---|---|
| Drum grooving | Lebus or helical; line size compatibility |
| Motor interface | GE 752 mounting and coupling arrangement |
| Clutch arrangement | UDBE-specific capsule and friction disc stack |
| Brake mounting | Elmagco 7838 or alternative brake interface |
| Skid/base | Land or offshore skid dimensions |
For dimension-critical replacement or overhaul planning, send the unit serial number and drum/motor/brake configuration to HYRIG for confirmation.
The 1320-UDBE is a single-drum, DC chain-drive drawworks. Power from the GE 752 traction motors is transmitted through the chain drive to the drum for hoisting. The Elmagco 7838 auxiliary brake provides supplementary braking during tripping and holding operations. The UDBE variant differs from the 1320-UE in clutch, brake and control arrangement; many wear components are dimensionally matched across the two variants, but clutch capsule, friction disc and seal fitment must be confirmed by installed position and reference P/N.
The 1320-UDBE sits in the 2000 HP drawworks tier alongside the 1320-UE and the Oilwell E-2000. When cross-referencing or selecting a replacement:
HYRIG can review photos, dimensions and the installed P/N to confirm whether a component is a drop-in replacement or requires adaptation.
Not sure whether your unit is a 1320-UE or 1320-UDBE, or which clutch/brake P/N fits your configuration? Send the nameplate data, a photo of the installed component, and the drum/motor/brake arrangement. HYRIG will confirm the correct replacement scope before quotation.
Used for hoisting operations on land and offshore drilling rigs in the 2000 HP class. Suitable for drilling and workover applications where a DC chain-drive drawworks is specified.
Safety note: Drawworks are heavy-lifting and high-pressure systems. Selection, installation, operation, and maintenance must be performed by qualified personnel in accordance with applicable industry standards, local regulations, and the manufacturer operating instructions.
HYRIG supplies replacement parts for the NOV 1320-UDBE by system. Reference P/Ns below are for identification; confirm exact fitment by model, serial/configuration, and installed position before order.
| System | Reference components | Reference P/N |
|---|---|---|
| Clutch & friction | High-speed clutch capsule; friction discs; diaphragms | 622835; 622836 / 627688; 618870-C |
| Brake system | Brake arm bushings; holding/emergency brake valves | 2110490 / 2110491; 7500537 / 2110255 |
| Seals & O-rings | Oil seals; O-rings | YS-2620 / YS-4752; 2410021-337 |
| Bearings & drive | Spherical roller bearings; inner/outer races | ZS3933 / ZS4720; 622923 / 622924 |
| Air control | Quick-release valves; diaphragms | 7500254; 622845 |
Reference P/Ns are for identification only. Not all P/Ns apply to every 1320-UDBE configuration. Confirm with HYRIG before order.
Q: Is the 1320-UDBE the same as the 1320-UE?
A: They share the same 2000 HP DC chain-drive platform, but the UDBE designation reflects a configuration variant in clutch, brake and control arrangement. Many wear components are dimensionally matched; confirm fitment by installed position and P/N.
Q: What motors are typical on a 1320-UDBE?
A: Two GE 752 traction motors, 1000 HP each, are commonly listed. Confirm the actual motor configuration on your unit.
Q: Can I order parts by P/N alone?
A: A reference P/N is a starting point, not a fitment guarantee. Provide the drawworks model, serial/configuration, and a photo of the installed position so HYRIG can confirm the correct replacement.
Q: Does HYRIG manufacture these parts?
A: HYRIG is a China-based supplier of replacement parts and drilling equipment. Components are sourced and manufactured to match the required dimensions and specifications; confirm the applicable standard and certification requirement before order.
Safety note: Heavy-lifting and high-pressure equipment. Only qualified personnel should select, install, or maintain drawworks components.
For NOV 1320-UDBE drawworks selection and replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.