HYRIG can supply compatible replacements for the NOV FMS (Flush Mounted Slips) range. These hydraulic floor-mounted slips are designed to handle casing from 2⅜ to 18⅝ in. and generate power-down force to take torque reaction.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | FMS275 Compatible Replacement | FMS375 Compatible Replacement | FMS495 Compatible Replacement |
|---|---|---|---|
| Load Rating | 250 sTon (226 Tonne) | 500 sTon (454 Tonne) | 1,500 sTon (1,360 Tonne) |
| Pipe Size Range | 2⅜–7⅝ in. | 4½–14 in. | 9⅝–18⅝ in. |
| Rotary Size | 27½ in. | 37½ in. | 49½ in. |
| Max Back-up Torque | 17,240 ft-lbs | 54,232 ft-lbs | 30,234 ft-lbs |
Data source: Technical data and parts list.
| Parameter | FMS275 | FMS375 | FMS495 |
|---|---|---|---|
| Minimum Inlet Pressure | 1,500 psi | 1,500 psi | 2,300 psi |
| Maximum Operating Pressure | 2,500 psi | 2,500 psi | 3,000 psi |
| Weight (w/o slips) | 2,755 lbs | 5,392 lbs | 11,675 lbs |
Explore the main model: NOV FMS375 Compatible Replacement.
| Dimension | FMS275 | FMS375 | FMS495 |
|---|---|---|---|
| Rotary Size (inches) | 27.5 | 37.5 | 49.5 |
| Weight w/ Slips (lbs) | 3,300 | 6,992 | — |
The FMS uses hydraulic power to set and raise slips remotely from the driller's console. The flush mounting lowers the casing connection height by 1 meter, eliminating scaffolding and reducing trip hazards.
Looking to replace a NOV FMS? Check these points before ordering:
These replacements are used with rotary support tables, control panels, and adapter plates.
Used for casing running operations, allowing the first casing joints to be run while providing backup torque.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which FMS model fits your casing program? Tell us your casing OD and rotary table size. Our engineers will verify the correct replacement before you order.
Q: Are these original NOV FMS units?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the main difference between FMS models?
A: FMS275 handles up to 250 sTon (7⅝ in. casing), FMS375 handles up to 500 sTon (14 in.), and FMS495 handles up to 1,500 sTon (18⅝ in.).
Q: Do these replacements require a separate control panel?
A: Yes, the FMS requires a hydraulic control panel to operate remotely from the driller's console.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV FMS compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.