NOV Lift Slings Compatible Replacement | 2-Way & 4-Way

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply compatible replacements for NOV lifting slings used with master bushings, power slips, and elevators. Available in 2-way and 4-way configurations.
Conatct For Details
DetailReview(0)Additional

NOV Lift Slings Compatible Replacement | 2-Way & 4-Way

HYRIG can supply compatible replacements for NOV lifting slings used with master bushings, power slips, and elevators. Available in 2-way and 4-way configurations.

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Key Facts

ParameterCompatible Lift Slings
Configurations2-way, 4-way
Load Ratings1.4 to 12.0 sTon
Designed ForMaster bushings, FMS, BX elevators, power slips
CertificationDNV 2.7-1, EN 818-4 (dependent on configuration)

Data source: Technical data and parts list.

Key Specifications & Model Comparison

ConfigurationRating (sTon)Designed For
2-way1.4MBH1250 casing bushing, drilling bowls
2-way2.8MPCH/MSP master bushings
4-way1.4MBH1250 drilling bowls, HCS bushings
4-way2.8MPCH/MSP master bushings, FMS375

Dimensions

DimensionValue
Standard Sling TypesChain and wire rope
Certification MarkingAttached tag

Structure / Working Principle

Lifting slings are designed to safely lift and position heavy rotary equipment. The 2-way sling is typically used for lifting bushings and bowls, while the 4-way sling is used for heavier assemblies like master bushings.

Cross-Reference & Replacement

Looking to replace NOV lift slings? Check these points before ordering:

  1. Equipment weight: Verify the load rating of the sling matches the equipment weight.
  2. Lifting points: Determine whether a 2-way or 4-way sling is required.
  3. Certification: Confirm the required certification standard (DNV or EN).

Compatible Host Models

These replacements are compatible with standard master bushings, elevators, and FMS units.

Applications

Used for safe lifting and positioning of rotary handling tools during rig-up and maintenance.

Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Selection Support

Not sure which sling fits your equipment? Tell us the equipment model and weight. Our engineers will verify the correct sling before you order.

Frequently Asked Questions

Q: Are these original NOV slings?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.

Q: What is the difference between 2-way and 4-way slings?
A: 2-way slings are typically used for lifting bushings and bowls. 4-way slings provide better stability for heavier assemblies like master bushings.

Q: Do these slings come with certification?
A: Yes, they can be supplied with DNV or EN certification depending on your requirements.

Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.

Contact

For NOV lift slings compatible replacements, contact HYRIG: info@hyrig.com

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit