NOV Manual Tong Parts | HT Series Lug Jaw & Snub Line Savers

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply compatible replacement parts for NOV HT series manual tongs. Find lug jaws for various pipe sizes and snub line savers for increased safety.
Conatct For Details
DetailReview(0)Additional

NOV Manual Tong Parts | HT Series Lug Jaw & Snub Line Savers

HYRIG can supply compatible replacement parts for NOV HT series manual tongs. Find lug jaws for various pipe sizes and snub line savers for increased safety.

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Key Facts

ComponentAvailability
Lug JawsVarious pipe sizes for HT55, HT65
Snub Line SaversFits HT14, HT35, HT50, HT55, HT65, HT100, HT200
CompatibilityNOV HT series manual tongs

Data source: Technical data and parts list.

Compatible Host Models

These parts are compatible replacements for the following models:

HT55 Lug Jaws

Pipe Size (in.)Max Torque (ft-lbs)
3½–535,000
5–6¾55,000
6⅝–955,000
9–10¾40,000
11¾30,000
1230,000
12¾–1330,000
13⅜30,000

Snub Line Savers

Part NumberFits Tong Type
17793626-001HT14
17793620-001HT35, HT50, HT55, HT65, HT100, HT200

Cross-Reference & Replacement

Replacing worn parts? Check these points before ordering:

  1. Tong model: Confirm whether your tong is an HT55, HT65, etc.
  2. Pipe size: Match the lug jaw to your exact pipe OD.
  3. Snub line saver: Verify the part number matches your tong model.

Applications

These replacement parts are used to maintain compatible manual tongs in drilling operations.

Disclaimer: HYRIG supplies lifting equipment parts for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.

Selection Support

Not sure which lug jaw matches your pipe? Provide your tong model and pipe OD. Our engineers will verify the correct components before you order.

Frequently Asked Questions

Q: Are these original NOV parts?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.

Q: How do I know which lug jaw to order?
A: Match the lug jaw pipe size range to your exact pipe OD. For example, 5-inch pipe uses the 5–6¾ in. lug jaw.

Q: Do I need a snub line saver?
A: Yes, NOV recommends the use of a snub line saver at all times for increased safety during manual tong operations.

Q: What is the typical lead time for replacement parts?
A: Lead time depends on stock status. Contact HYRIG with your part numbers and quantity.

Contact

For NOV manual tong replacement parts, contact HYRIG: info@hyrig.com

NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.

Related Pages

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit