HYRIG can supply a compatible replacement for the NOV SBX7 elevator. The NOV SBX7 is a solid body elevator with one manually operated door for high loads up to 1,250 sTon (1,133 Tonne), designed for deepwater drilling rigs.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Compatible SBX7 Replacement |
|---|---|
| Load Rating | 1,250 sTon (1,133 Tonne) |
| Size Range | 5½–9⅝ in. (139.7–244.5 mm) |
| Weight | 4,195 lbs (1,903 kg) |
| Body Type | Solid body, one manually operated door |
| Replacement Compatibility | Replaces NOV SBX7 configurations |
| Application | Deepwater and ultra-deepwater drilling |
Data source: Technical data and parts list.
| Parameter | Value |
|---|---|
| Bushing Compatibility | Standard BX7 bushings and dedicated SBX7 bushings |
| Handling Type | Manually operated door |
| Dimension | SBX7 Value |
|---|---|
| Size Range (inches) | 5.1/2 - 9.5/8 |
| Size Range (mm) | 139.7 - 244.5 |
The SBX7 is a solid body elevator with one manually operated door. It is suitable for use with standard BX7 bushings and dedicated SBX7 bushings, designed for (ultra-) deepwater drilling rigs.
Looking to replace a NOV SBX7? Check these points before ordering:
Used with deepwater drilling rigs and standard BX7 casing bushings.
Used for lifting heavy landing strings and casing in deepwater drilling operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure if this compatible replacement will fit your NOV SBX7 setup? Tell us your pipe OD and link configuration. Our engineers will verify the bushing requirements before you order.
Q: Is this an original NOV product?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the maximum load rating of the SBX7 replacement?
A: It is rated at 1,250 sTon (1,133 Tonne).
Q: Will this replacement accept standard NOV BX7 bushings?
A: The replacement is designed to accept standard BX7 bushings.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV SBX7 compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.