HYRIG can supply compatible replacements for the NOV RHS (Rotary Hand Slips). These slips are designed to hang off drill pipe during running in or pulling out of hole.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Compatible RHS Replacement |
|---|---|
| Slip Size Range | 2 to 7 in. |
| Load Rating | 240 to 750 sTon |
| Bowl Compatibility | API standard bowl #1, #2, or #3 |
| Backup Torque | Not allowed |
| Replacement Compatibility | Replaces NOV RHS configurations |
Data source: Technical data and parts list.
| Slip Size (in.) | Bowl # | Load Rating (sTon/Tonne) | Mass Slip Set (lbs/kg) |
|---|---|---|---|
| 7 – 6 | #3 | 750 / 680 | 245 / 111.1 |
| 6 – 5 | #3 | 675 / 613 | 252.3 / 114.5 |
| 5 – 4 | #3 | 500 / 454 | 243.3 / 110.4 |
| 4 – 3 | #3 | 350 / 317 | 230 / 104.3 |
| 2 – 3 | #3 | 240 / 218 | 207.3 / 94 |
| Dimension | RHS Value |
|---|---|
| Height | 20 in. (equal to a standard 37½ in. MPCH Master Bushing) |
The RHS is a slip to hang off drill pipe in an API standard insert bowl. Setting and lifting the RHS is done manually or by a Slip Lifter tool (SLT) or Power Slip Frame (PSF). The RHS body can be dressed with different size inserts to handle various pipe sizes.
Looking to replace NOV RHS slips? Check these points before ordering:
These replacements are compatible with standard API master bushings and rotary tables.
Used to hang off drill pipe during running in or pulling out of hole.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which slip fits your pipe? Tell us your drill pipe OD and bowl number. Our engineers will verify the correct replacement before you order.
Q: Are these original NOV RHS slips?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: Can RHS slips be used for back-up torque?
A: No. RHS slips are not allowed for back-up torque.
Q: What is the maximum load rating of the RHS replacement?
A: The 7–6 inch RHS compatible replacement is rated at 750 sTon (680 Tonne).
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV RHS slips compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.