HYRIG can supply compatible replacements for the NOV SSW and KS series spinning wrenches. The SSW30 and SSW40 are spinning wrenches designed to spin drill pipe and drill collars during tripping operations.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | SSW30 Compatible Replacement | SSW40 Compatible Replacement |
|---|---|---|
| Type | Hydraulic | Pneumatic |
| Size Range | 2⅞–9½ in. (73–241 mm) | 3½–9½ in. (89–241 mm) |
| Max Torque (5" pipe) | 1,000 ft-lbs (1,350 Nm) | 1,100 ft-lbs (1,490 Nm) |
| Operating Pressure | 2,000 psi (13,790 kPa) | 90–125 psi (620–860 kPa) |
| Weight | 850 lbs (385 kg) | 780 lbs (353 kg) |
Data source: Technical data and parts list.
| Parameter | SSW30 Value | SSW40 Value |
|---|---|---|
| Power Requirement | 29–45 gpm (106–170 lpm) | 250 cfm (530 dm3/s) |
| RPM (5" pipe) | 100 rpm | Operator controlled |
Explore the specific pneumatic model: NOV SSW40 Spinning Wrench Compatible Replacement.
| Dimension | SSW30 Value | SSW40 Value |
|---|---|---|
| Size Range (inches) | 2.7/8 - 9.1/2 | 3.1/2 - 9.1/2 |
| Size Range (mm) | 73 - 241 | 89 - 241 |
The SSW30 uses one large cylinder for clamping, achieving a compact shape. The SSW40 uses four drive rollers powered by two motors, precisely controlled by the operator for slow walking in of drill collars or fast spinning.
Looking to replace your existing NOV spinning wrench? Check these points before ordering:
These replacements are used with standard rotary drilling rigs and pipe handling systems.
Used to spin drill pipe and drill collars to bump up shoulders tight enough for final torquing.
Disclaimer: HYRIG supplies lifting and pipe handling equipment for industrial applications. Please verify local safety regulations before use.
Not sure which model fits your rig? Tell us your pipe size range and power supply. Our engineers will verify the correct replacement before you order.
Q: Are these original NOV spinning wrenches?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the difference between SSW30 and SSW40?
A: SSW30 is hydraulic and handles 2⅞–9½ in. pipe. SSW40 is pneumatic and handles 3½–9½ in. pipe.
Q: Will the SSW40 replacement accept standard NOV rollers?
A: The SSW40 uses an easy adjustment screw that eliminates the need to change rollers for different pipe sizes.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV spinning wrench compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.