HYRIG can supply compatible replacements for the NOV welldess links. These links are forged from a single piece of alloy steel to provide maximum tensile strength for elevator handling.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Compatible Welldess Links |
|---|---|
| Load Range | 100 to 1,500 sTon |
| Material | High-grade alloy steel |
| Standard | API 8C specification |
| Eye Design | Short upper eye for better balance |
| Replacement Compatibility | Replaces NOV welldess links |
Data source: Technical data and parts list.
| Link Rating | Available Lengths (in.) | Approx. Weight per set (lbs) |
|---|---|---|
| 100 sTon | 30, 36, 42, 48, 60 | 134–234 |
| 250 sTon | 48, 60, 72, 84, 96, 108, 120, 132, 168, 180, 192, 216 | 452–1,124 |
| 350 sTon | 48, 60, 72, 84, 96, 108, 120, 132, 144, 156, 168, 180, 192, 216, 240, 264 | 546–1,734 |
| 500 sTon | 72, 80, 96, 108, 120, 132, 144, 156, 168, 180, 192, 216, 240, 252, 264 | 990–2,718 |
| 750 sTon | 96, 108, 120, 132, 144, 160, 180, 192, 200, 216, 240, 252, 264, 276, 288, 300, 360 | 3,038–7,262 |
| 1,000 sTon | 96, 132, 144, 180, 200, 218, 240, 264, 360 | 4,210–8,090 |
| 1,250 sTon | 96, 108, 132, 144, 180, 200, 216, 240, 264, 360 | 4,210–8,090 |
| 1,500 sTon | 96, 108, 132, 144, 180, 200, 220, 240, 264, 360 | 4,841–9,926 |
| Dimension | 100 sTon | 250–500 sTon | 750–1,500 sTon |
|---|---|---|---|
| Upper/Lower Eye | Equal | Not equal | Equal |
| API Compliance | API 8C | API 8C | API 8C |
Welldess links are forged from a single piece of alloy steel. The "plus-diameter" in critical areas makes these links extra strong. The short upper eye design provides better balance and reduces wear against the swivel bail.
Looking to replace NOV welldess links? Check these points before ordering:
These replacements are compatible with standard elevators and traveling blocks.
Used to connect the elevator to the traveling block for lifting drill pipe, casing, and tubing.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which link length and rating fits your rig? Tell us your elevator load and required length. Our engineers will verify the correct replacement before you order.
Q: Are these original NOV welldess links?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the difference between 100 sTon and 250 sTon links?
A: 100 sTon links have equal upper and lower eyes. 250 and 350 sTon links do not have equal upper and lower eyes.
Q: Do these links comply with API standards?
A: Yes, the dimensions comply with API 8C specification.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV welldess links compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.