HYRIG can supply compatible replacements for the NOV CMS casing slips and DCS drill collar slips. These slips provide full wraparound grip for heavy casing and drill collar strings.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | CMS Compatible Replacement | DCS Compatible Replacement |
|---|---|---|
| Type | Casing Slips | Drill Collar Slips |
| Size Range | 6⅝–30 in. | 3–14 in. |
| Design | Multi-segment, full wraparound | Circular button gripping |
| Taper | 4 in. per ft on diameter | 4 in. per ft on diameter |
| Load Ratings | 340–500 sTon | 136–150 sTon |
Data source: Technical data and parts list.
| Parameter | CMS Slips | DCS Slips |
|---|---|---|
| Casing/DC OD | 6⅝ to 30 in. | 3 to 14 in. |
| Grip Type | Self-centering full wraparound | Full wraparound with circular buttons |
| Dimension | CMS Value | DCS Value |
|---|---|---|
| Max OD Handled | 30 in. | 14 in. |
| Taper (API) | 4 in. per ft | 4 in. per ft |
The CMS slips are manufactured from castings reinforced for severe service. The self-centering full wraparound grip prevents damage to casing. DCS slips use circular button gripping elements and a full wraparound design for positive holding.
Looking to replace NOV CMS or DCS slips? Check these points before ordering:
These replacements are compatible with standard API master bushings and rotary tables.
CMS slips are used for running heavy casing strings. DCS slips are used for handling drill collars.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which slip fits your pipe? Tell us your casing or drill collar OD. Our engineers will verify the correct replacement before you order.
Q: Are these original NOV slips?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the difference between CMS and DCS slips?
A: CMS slips are designed for casing strings with a multi-segment wraparound. DCS slips are designed for drill collars and use circular button gripping elements.
Q: What is the API taper of these slips?
A: Both CMS and DCS compatible replacements use a 4-inch per foot API taper on the diameter.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV CMS and DCS slips compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.