HYRIG can supply compatible replacements for the NOV wire line guide. The wire line guide is designed to absorb dangerous whiplash and traveling waves in wire lines.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | Compatible Wire Line Guide |
|---|---|
| Wire Diameter | Up to 2.5 in. (63.5 mm) |
| Weight | Approx. 165.8 lbs (75.2 kg) |
| Material | Extreme wear-resistant bushings |
| Replacement Compatibility | Replaces NOV wire line guide configurations |
| Protective Coating | Hot metal spray |
Data source: Technical data and parts list.
| Component | Part Number / Size |
|---|---|
| Wire Line Guide Assembly | 11467858-ASM |
| Bushing Size (Up to 2.5" wire) | 3.00 in. (76.2 mm) inner bore |
| Dimension | Value |
|---|---|
| Max Wire Diameter | 2.5 in. (63.5 mm) |
The wire line guide absorbs whiplash and waves through wear bushings made from low-friction, wear-resistant bearing material. The energy is transmitted through the guide body to the hanging assembly, assuring a straight and steady line motion with maximum damping.
Looking to replace a NOV wire line guide? Check these points before ordering:
Used with standard drilling rigs and wire line systems.
Used to absorb whiplash and traveling waves in wire lines, preventing excessive wire line wear and line pile-up.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which wire line guide fits your rig? Tell us your wire diameter. Our engineers will verify the correct replacement before you order.
Q: Are these original NOV wire line guides?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the maximum wire diameter for this replacement?
A: It is designed for fast-line diameter up to 2.5 in. (63.5 mm).
Q: Can I replace just the bushings?
A: Yes, replacement bushings are available and should only be replaced with compatible HYRIG bushings.
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV wire line guide compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.