HYRIG can supply compatible replacements for the NOV CUL and CB casing bushings. These bushings are inserted directly into the rotary table to ensure proper alignment of the casing.
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
| Parameter | CUL Compatible Replacement | CB Compatible Replacement |
|---|---|---|
| Design | Solid bushing | Split bushing |
| Casing Size Range | 18⅝ to 30 in. | 9⅝ to 30 in. |
| Load Rating | 500 sTon (454 Tonne) | 500 sTon (454 Tonne) |
| Rotary Table Sizes | 26, 27½, 37½, 49½ in. | 26, 27½, 37½, 49½ in. |
| Replacement Compatibility | Replaces NOV CUL configurations | Replaces NOV CB configurations |
Data source: Technical data and parts list.
| Type | Casing Size (in.) | Load Rating (sTon/Tonne) | Weight (lbs/kg) |
|---|---|---|---|
| CUL | 18⅝ and 20 | 500 / 454 | 938 / 425.5 |
| CB | 16 | 500 / 454 | 562 / 255 |
| CB | 18⅝ and 20 | 500 / 454 | 713 / 323 |
| CB | 24 | 500 / 454 | 1,200 / 544 |
| CB | 30 | 500 / 454 | 1,499 / 680 |
| Dimension | Value |
|---|---|
| Max Casing Size | 30 in. |
| Rotary Table Size Range | 26 to 49½ in. |
CUL and CB casing bushings are inserted directly into the rotary table and ensure that the casing being run is perfectly aligned with the center of the hole. Model CUL is a solid bushing and model CB is a split bushing. Both accept bowls of different sizes to accommodate a wide range of casing.
Looking to replace a NOV CUL or CB bushing? Check these points before ordering:
Used with standard rotary tables and CMS casing slips.
Used to align casing with the center of the hole during casing running operations.
Disclaimer: HYRIG supplies lifting equipment for industrial applications. Please verify local safety regulations and request valid certification documents before use. Never exceed the rated load capacity.
Not sure which casing bushing fits your rotary table? Tell us your casing OD and rotary table size. Our engineers will verify the correct replacement before you order.
Q: Are these original NOV bushings?
A: No. HYRIG supplies independent, compatible replacement products and is not affiliated with NOV.
Q: What is the difference between CUL and CB bushings?
A: CUL is a solid bushing, while CB is a split bushing.
Q: What is the load rating of these casing bushings?
A: The compatible replacements are rated at 500 sTon (454 Tonne).
Q: What is the typical lead time?
A: Lead time depends on configuration. Contact HYRIG for a confirmed delivery estimate.
For NOV CUL and CB casing bushing compatible replacements, contact HYRIG: info@hyrig.com
NOV is a registered trademark of National Oilwell Varco. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by National Oilwell Varco.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.