WPT Power Grip 114 Clutch | 14" 1-Plate Pneumatic

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG can supply a compatible replacement for the WPT Power Grip 114 pneumatic clutch. The 114 is a 14-inch, single-plate air-actuated clutch designed for in-line power transmission on drilling rig drawworks. WPT Power Grip® is a registered trademark of WPT Power Corporation. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by WPT Power Corporation.
Conatct For Details
DetailReview(0)Additional

Key Facts

AttributeValue
Product TypeAir-actuated, single-plate pneumatic clutch
Compatible SeriesWPT Power Grip 11 series
Plate Configuration1 plate
Typical HostDrawworks, auxiliary drives
Replacement CompatibilityForm-fit-function replacement; verify shaft bore and adapter bolt pattern

> Data source: Technical data table.

WPT Power Grip 114 Specifications

ParameterValue
Size / Diameter14 in
Plate Count1
Air ActuationAir tube type

Dimensions

Dimension ItemReference / Action
Bore RangeConfirm existing shaft diameter and keyway dimensions
Driving Ring Bolt PatternMeasure adapter bolt circle
Overall Diameter14 in nominal; confirm clearance

Structure / Working Principle

The Power Grip 114 uses compressed air to inflate an air tube, pressing the friction disc against the driving ring. Release springs disengage the clutch when air is exhausted.

Cross-Reference & Replacement

Replacing a WPT Power Grip 114? Verify:

  1. Shaft and keyway — measure existing shaft.
  2. Adapter bolt pattern — record the bolt circle and hole diameter.
  3. Plate count — the 114 is 1-plate. If your unit has 2 or 3 plates, you need the 214 or 314.

Compatible Host Models

Commonly used on standard drawworks auxiliary drives.

Internal links:

Applications

Suitable for standard drawworks power transmission.

Selection Support

Send HYRIG the nameplate photo and shaft dimensions.

Frequently Asked Questions

Q: What is the difference between 114 and 214?
The 114 has 1 plate; the 214 has 2 plates, providing higher torque.

Q: What is the lead time?
Standard lead time is quoted per order.

Q: Can I buy wear parts separately?
Yes, verify part numbers against your drawing.

Contact

Contact HYRIG: info@hyrig.com

Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit