Product Overview
The HYRIG OH2 Light Ends Pump is a heavy-duty, horizontal, single-stage overhung centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for light hydrocarbon liquids (C2 to C5 fractions, LPG, light naphtha), this pump features a centerline mounted support and back pull-out design to safely handle high vapor pressure, low viscosity, and volatile fluids.
Light ends are prone to vaporization at low suction pressure and require strict leakage prevention. The HYRIG OH2 design offers low NPSH hydraulics, double mechanical seals, and robust containment to ensure safe, continuous operation.
Key Technical Parameters
Pump Type: API 610 OH2 Horizontal Overhung Centrifugal Pump
Flow Range: 5 – 1500 m³/h
Head Range: 30 – 400 m (higher with multi-stage option)
Working Temperature: -40°C to 80°C (higher with special materials upon request)
Design Pressure: Up to 40 bar
Viscosity: Low (suitable for volatile hydrocarbons like propane, butane, light naphtha)
Structure: Centerline mounted, back pull-out
Seal Standard: API 682 double mechanical seal (typically Plan 53A, 53B, or 54 for pressurized dual seal)
Materials: Carbon steel (WCB/LCC), stainless steel (CF8/CF8M) for corrosion resistance and low temperature toughness
Application: LPG transfer, light naphtha circulation, depropanizer/dibutanizer feed, butane/pentane handling, refinery light ends recovery
Key Features
API 610 Compliance – Meets international refinery and petrochemical standards for reliability.
Low NPSH Performance – Optimized inducer impeller available for high vapor pressure liquids near boiling point.
Leakage Containment – Double mechanical seal arrangement (pressurized dual seal) eliminates fugitive emissions of volatile hydrocarbons.
Low Temperature Integrity – Impact tested materials for service down to -40°C.
Easy Maintenance – Back pull-out design allows seal and bearing replacement without disturbing piping or motor.
Low Vibration & Long Life – Heavy duty shaft, precision dynamic balancing for continuous critical service.
Typical Applications
Light ends transfer pump in FCC or crude unit
LPG (propane/butane) shipping, storage, or mixing
Light naphtha feed to isomerization or reforming units
Depropanizer and debutanizer overhead reflux/feed pumps
Alkylation unit light hydrocarbon circulation
Why HYRIG?
HYRIG combines decades of experience in handling volatile hydrocarbons with precision engineering. Each OH2 Light Ends Pump features low NPSH optimized impellers, API 682 double seal arrangements, and vibration-tested assemblies to ensure safe, emission-free operation. HYRIG pumps are a trusted choice in refineries and gas processing plants worldwide.
Contact Us
For technical quotation, NPSH analysis, or custom solutions for your light ends unit, please email us at: info@hyrig.com
Our engineering team will respond within 24 hours with a pump selection tailored to your specific hydrocarbon composition.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.