HYRIG OH2 Residue Pump – API 610 Horizontal Overhung Centrifugal Pump for Residue Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG OH2 Residue Pump: API 610 compliant, horizontal centerline mounted overhung pump. Flow 5-2000 m³/h, head 30-200 m, temp up to 400°C, design pressure up to 30 bar. Optimized for atmospheric and vacuum residue, high viscosity heavy oil. Wear resistant materials, API 682 high temperature seal with quench. Back pull-out design.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG OH2 Residue Pump is a heavy-duty, horizontal, single-stage overhung centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for atmospheric and vacuum residue service in refineries, this pump features a centerline mounted support and back pull-out design to reliably handle high viscosity, high temperature, and abrasion-prone heavy oils.

Residue pumps operate at the bottom of the barrel, where fluids contain entrained coke fines, catalyst particles, and asphaltenes. The HYRIG OH2 design ensures extended service life under these severe conditions.

Key Technical Parameters

  • Pump Type: API 610 OH2 Horizontal Overhung Centrifugal Pump

  • Flow Range: 5 – 2000 m³/h

  • Head Range: 30 – 200 m (higher with multi-stage version available)

  • Working Temperature: Up to 400°C

  • Design Pressure: Up to 30 bar

  • Viscosity: Suitable for up to 2000 cSt at pumping temperature

  • Structure: Centerline mounted, back pull-out

  • Seal Standard: API 682 high temperature seal (Plan 62 quenching recommended; Plan 23 optional)

  • Materials: Carbon steel (WCB/WCC) with 12% chrome or 316SS trim; hard faced wear rings and bushings for abrasion resistance; optional steam jacketed casing

  • Application: Atmospheric residue (AR), vacuum residue (VR), reduced crude, heavy fuel oil, bitumen

Key Features

  • API 610 Compliance – Meets international refinery standards for heavy duty continuous service.

  • High Viscosity Capability – Optimized impeller vane design and oversize shaft to handle thick fluids.

  • Abrasion Resistance – Hardened chrome steel or tungsten carbide wear rings; optional ceramic shaft sleeves.

  • Thermal Stability – Centerline mounting prevents distortion at high temperatures; steam jacketed casing option for cold start or high viscosity reduction.

  • Reliable Sealing – API 682 Plan 62 with steam or water quench to prevent residue coking on atmospheric side of seal.

  • Easy Maintenance – Back pull-out design allows rotor and seal replacement without disturbing piping or motor.

Typical Applications

  • Atmospheric residue pump from crude unit

  • Vacuum residue pump from vacuum tower bottom

  • Reduced crude transfer to coker or visbreaker

  • Heavy fuel oil shipping and circulation

  • Bitumen and asphalt pumping with steam jacketed casing

Why HYRIG?
HYRIG applies decades of bottom-of-barrel pumping experience to every OH2 Residue Pump. Our pumps feature hardened wear surfaces, high temperature API 682 quench seals, and robust bearing frames to maximize mean time between repairs. HYRIG residue pumps deliver proven uptime in refineries and upgraders worldwide.

Contact Us
For technical quotation, viscosity analysis, or custom abrasion resistant solutions for your residue unit, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your residue properties.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit